View Full Version : WRX endlinks on legacy?

11-08-2005, 05:56 PM
Do WRX endlinks fit onto a legacy? Im guessing they would, since theres not much difference in them.

11-08-2005, 06:15 PM
i know for a fact that the rear ones do. i have my old ones on the BD now.

you have to be careful with the fronts. you need to get the ones that are shaped like a dog-bone (like perrin).

the ones like these AVOs from rallitek won't fit, and neither will the hotchkis ones.

from my own personal, expensive experience, these DON'T fit.


01-03-2007, 11:45 PM
I need further help on this. I've searched SLi but didn't find the answer. I've checked the manufacturers' sites of aftermarket front endlinks but am still puzzled. No aftermarket manufacturer that I found lists the second generation Legacy. So, which ones do I look for?

So, here goes. I have a '98 Legacy wagon and am looking to get front endlinks for it.

A few examples:

Whiteline has front endlinks (KLC30) for the EARLY Legacy. But the KLC32 looks the same but is of different length and is made for the "04-05 MY01-05 WRX STi's".

Kartboy KB-017W is made for the wrx wagons and '93-'01 Imprezas and it is different from the KB017F made for the '02+ wrx and '04+ sti.

But Perrin's front endlilnk is made for all '93-'01 Impreza, the '02+ wrx, and the '04+ sti unlike Whiteline and Kartboy. (I think it's because of the bushing Perrin uses but I may be mistaken.)

Does anyone know for sure which front endlinks will fit my car since they are all dogbone shaped?

01-03-2007, 11:53 PM
STi endlinks won't fit.

To be safe, endlinks (both front and rear) listed for the GC impreza (95-01 IIRC) will fit BD/BG Legos. Heck, even the front endlinks off a GC will fit a BE/BH legacy as well (I have whiteline endlinks in the front of mine).

01-03-2007, 11:55 PM
OK, thank you!!!

03-01-2010, 02:07 PM
Sorry to resurrect this thread, but I have the opportunity to pick up some OEM solid front endlinks off an 05 wrx sedan. I know the majority of aftermarket front endlinks fit both WRX and 2nd gen Legacys. What I want to know is whether oem steel front endlinks off of an 05 wrx sedan will fit the BD chassis?

03-01-2010, 11:06 PM
What about 3rd gens? What all fits ours?

03-02-2010, 08:09 AM
take a pic of where the endlink attaches.

03-02-2010, 10:58 AM
take a pic of where the endlink attaches.

I don't have a pic. I haven't purchased them yet. All I know is they are OEM steel front endlinks for 05 wrx sedan. Can anyone enlighten me?

09-16-2013, 01:06 PM
I have put 4th gen endlinks on my 1st gen, they are a ball joint style so no more bushing flex. Just bend one tab over, simple and reversible.