code 51

[BDS13driver]

Hi, My abs kicks in out of nowhere while i was braking slowly today, and after that the abs light came on. so once i got home i follow the procedure to diagnosis the abs system and i have pull code 51 ( 5 long 1 short ), which is valve relay. so my question is where is this valve relay is located/hiding ? or got any suggestions fixing this problem that i have?

thanks

[Huffer]

Check your wheel sensors, and the ABS relay is under the hood in the fusebox.

[BDS13driver]

still don't see the relay in the fuse box under the hood, however when i took off the wheel i find a chunk of what i believe to be abs rotor back hanging around the rotor wtf... :-/ :smt013 ... not only that... what's even more worst is i found (very old )silicone around it too.

here is a pic of that piece


btw do anyone have a piece of that for sale ?

https://sl-i.net/FORUM/images/imported/2009/02/DSC00163-1.jpg

[97legacygt]

I hate to say it, but that could be an expensive repair if you bring it to the stealership. I don't know if you can buy just the toner ring without buying the entire hub the entire hub. If I remember right, it gets screwed into hub and you would have to press the hub out to get a new one on without breaking it.

[BDS13driver]

i hope not. because when i look at the fsm and the parts manual... it seems like that part can be separate from the hub and the part # for it is 26750AA003 or 27550AC000

[97legacygt]

i hope not. because when i look at the fsm and the parts manual... it seems like that part can be separate from the hub and the part # for it is 26750AA003 or 27550AC000
Yeh, I didn't really know if they sold just the ring. That's good to know.

[decke48]

i have a hub going onto a 96 legacy sometime soon if it doesnt have abs. ill rip the ring off it

[oskar_subaru]

if you want to install a new abs ring, that means you have to press in a new wheel bearing, no way around that.

also that might be the reason it broke, when the bearing failed on my SUS i did not make a sound (some creaking and weird sounds but no usual bearing noise) and when it failed it completely fell to pieces and the abs ring hit the sensor and broke both.

[greenspeed]

I'm reviving this cause I have the same code.

I looked under the good and I have 6 relays. 1 for each headlight then 4 that say a/c relay. Where's the abs relay?

[greenspeed]

I don't feel so bad no one knows where the relay is!