SRT-4

[Airgne]

so a buddy of mine is getting seat for his srt-4(his gurlfriends is buying them for him), and i was wondering is anyone knew if these could work in my BC5?

[decke48]

first what seat are they? bride, sparco, other brand? most of those brands have rail that bolt up to the subaru that bolt to the seat brackets. if there dodge seats. GL

[T_F_E]

I think he means the stock srt-4 seats because his buddy will look to get rid of them

[Airgne]

they look like recaro made. they are so comfortable and hold you good. nice bolsters on them.

[impreza_GC8]

You will most likely need to cut off the Dodge mounting brackets and cut off your Subaru mounting "feet" from your stock seats, then weld your Subaru "feet" onto the proper points on the Dodge rail. That is probably a best case scenario. Worst case is you'll need to find a friend who can weld and get some custom rails/brackets made. Its not too hard to do, there are writeups online.

[subba]

you should try and see if your comfortable when shifting gears in a SRT-4 seat, i keep hitting the sides of the seat but they are comfy though :) (it should fit with the seatrail mod GC8 outlined in the above post)

We call SRT-4's Squirtle down here, if it has eyelids they are called Wartortle and Rage Tek makes rare candy :lol:

[chuckthefuk]

You will most likely need to cut off the Dodge mounting brackets and cut off your Subaru mounting "feet" from your stock seats, then weld your Subaru "feet" onto the proper points on the Dodge rail.

Impreza_GC8 is correct

You can build simple brackets that reuse stock subaru rails + sliders with materials from Home Depot for under $30.

Read this: viewtopic.php?f=8&t=12265 (http://www.sl-i.net/FORUM/viewtopic.php?f=8&t=12265)

-Chuck