KYB's AGX in a BK 95

[isabura]

I saw a post of a guy here who putted 02-03 wrx AGX in his legacy wagon. I want to get those along with prodrive springs. But he got his from a guy off of ebay, so where can I find these for my BK? Were they ever made for a WRX wagon?

Also, since my car has a lot of miles on it, I was going to buy some KYB atrut mounts along with them. Is there any other parts that should be replaced, too?

Thanks

[Huffer]

KYB never made the AGX struts specifically for the BK - but if you swap in WRX or GC Impreza suspension then it should all bolt up nicely if you use WRX/GC Impreza springs.

Your best bet is to read the suspension threads where people have swapped in WRX suspensions, find out what works and go with that.

[decke48]

you can use impreza suspension. but depending on what springs your run will determine what top hats you need to run. if you deside to run 93-01 springs you need to use 93-01 impreza front perchs w/ impreza or legacy mounts, rears you need to use your legacy mounts since 93-01 used a smaller bolt pattern mount, but legacy mounts will fit 93-01 rear springs (i can confirm because im using 93-01 rear springs with legacy mounts and struts) oem 93-01 springs raise the front and lower the rear, sounds weird but its true, since 93-01 front perchs are a little taller and have the same length spring as the legacy, now the rear have shorter springs but have a tall perch, when the legacy have a short perch. now ive never done a wrx suspension upgrade on a legacy so someone else will have to chime in. now the only thing about using impreza struts is the brake lines mounts are different

[isabura]

I've been reading other people's post about the impreza 93-01 springs in a legacy. But I've also read in the nasioc legacy>wrx suspension swap faq about using only wagon parts with wagons. It creates problems when its a sedan>wagon. Is it the same with the 93-01 impreza?