Log in

View Full Version : Stereo compatibility



GF8_BG5
07-30-2009, 04:01 PM
Noob here. Couple questions I'm hoping to get answer for. Wifey has a 96 Leggy that I just picked up a few months ago and have some some cosmetic project plans for it. Hopefully get some incite from you die hard legacy ridahs!


Just wondering if anyone knows if the 02+ WRX 6 disc changers (CD/Stereo) are plug n play with the 96 Legacy LSi Wagon harness?

Does anyone know if the GT-B front bumper slip right on the front bumper beam with no mods needed? If mods are needed, does anyone have a DIY doc that they can share?

Are the projector headlights for the BD/BG's HID? Planning to pick some up on ebay, or NASIOC, but not sure if it's a plug n play gig as well?

Any help with the above questions would greatly be appreciated. Subaru for life!!

Huffer
07-30-2009, 04:50 PM
Just wondering if anyone knows if the 02+ WRX 6 disc changers (CD/Stereo) are plug n play with the 96 Legacy LSi Wagon harness?

Does anyone know if the GT-B front bumper slip right on the front bumper beam with no mods needed? If mods are needed, does anyone have a DIY doc that they can share?

Are the projector headlights for the BD/BG's HID? Planning to pick some up on ebay, or NASIOC, but not sure if it's a plug n play gig as well?

1. Yes.
2. Probably not - you'll need a later model bumper beam or the JDM beam. If you're handy with an angle grinder you can make your stock one work. Check with Grafton.
3. No. But they are a vast improvement over the stock headlights.

Grafton
08-01-2009, 12:28 AM
i was lucky when i got my jdm bumper i got the beam and fog-lights, but from what i can remember the plastic part would went right onto my usdm bumper beam

Wiscon_Mark
08-04-2009, 09:41 PM
3. No. But they are a vast improvement over the stock headlights.

And to expand on that - they can be made HID with a swap of the projectors and the HID assembly from a newer model car like an Audi or a BMW.