Have highbeam and lowbeam on with JDM projectors?

[Zac]

I have JDM projectors on my BK and I was wondering if there was a way to keep the lowbeams on when I flick to highbeams? I've looked at the diagram and cant see if there is a way but i've heard that others have done it.

[MyogiNightKid]

To keep the High Beams on, as was stated earlier, take the yellow wire (low beam ground) from each light, cut it from the harness and ground it to a body point. I used the outer bolts for the headlights using eye hooks.

Thanks to everyone for their help! :smt006



So is grounding the LB wire the way to get all 4 lights to light when High Beam is selected?

I was wondering about this as well; I just ordered a set so when they arrive I'll do some experimentation.

Edit #2:
Ok, to make the low beams stay on with the high beams, I simply ground the low beam wire (yellow).
I wired my city light in with the power wire (black/yellow passenger side, red/blue driver side).

Now all four lights come on with high beam.

Sorry for the confusing pic, hopefully someone can make sense of it.

https://sl-i.net/FORUM/images/imported/2008/12/IMG_27871-1.jpg

From viewtopic.php?f=39&t=5941&start=60 (https://sl-i.net/FORUM/viewtopic.php?f=39&t=5941&start=60)

[anothernord]

Yep, that's what I did, just ground the low beam wire (yellow).

[ouch1011]

Awesome, I was just looking into doing this when I install my HIDs.