Results 1 to 19 of 19

Thread: Recommendations for a buffing tool?

  1. #1
    Administrator Huffer's Avatar
    Join Date
    Sep 2005
    Location
    Eastlake, OH / Wellington, NZ
    Posts
    13,377
    Points
    44,297
    Level
    100
    Points: 44,297, Level: 100
    Level completed: 0%, Points required for next Level: 0
    Achievements:
    25000 Experience PointsO.G.SocialOverdrive

    Recommendations for a buffing tool?

    So my car has a TON of small road chips that are rusting away in the paint, I know I can claybar it - but I'm looking for a good tool to put wax or polish on, and then use my power drill to hit the claybar'd surface.

    Any recommendations? I have a Meguiar's powerball that I use for my headlight polish, could I use that or would it be too abrasive?
    - Roger - Site Admin
    My signature is now a shout-out to the SLi veterans who keep this site flowing with good knowledge and informative opinion. You KNOW who you are, so keep it up!
    USDM 04 LL Bean H6 Wagon - TANK
    USDM 98 GT Wagon - Pandgrish - RIP; USDM 98 GT Sedan - 216k RIP; NZDM 99 GF8 - retired
    USDM 07 Honda Odyssey - Mrs Huffer;
    Live Like No One Else - Debt Free

  2. #2
    SLi O.G. d1giPhux's Avatar
    Join Date
    Dec 2005
    Posts
    3,244
    Points
    20,084
    Level
    89
    Points: 20,084, Level: 89
    Level completed: 47%, Points required for next Level: 266
    Achievements:
    10000 Experience PointsO.G.Overdrive

    Re: Recommendations for a buffing tool?

    You could pick up and HF special for cheap :

    http://www.harborfreight.com/7-inch-var ... 92623.html

    I know someone who has one, and he swears by it. I personally have an expensive one (porter cable).. and wish I had just bought a cheap one instead, since mine is DA, it doesnt seem to have as much power as a 'rotary' model for buffing out really tough scratches and such. You can buy special pads at like autogeek or something along those lines.
    --99 Legacy GT Limited Edt. (Silver ! )

    99 Subaru Legacy FSM Download:
    http://tinyurl.com/2u8cbx

  3. #3
    SLi O.G. httrdd's Avatar
    Join Date
    Sep 2009
    Location
    NEPA
    Posts
    2,700
    Points
    11,761
    Level
    71
    Points: 11,761, Level: 71
    Level completed: 28%, Points required for next Level: 289
    Achievements:
    10000 Experience PointsO.G.

    Re: Recommendations for a buffing tool?

    Yea if you only use it once in a while then just but the HF one. I am getting one before winter. Meguiers makes come really good cutting pads and compounds.
    TJ

    99 LGT H6 Limited OBP

    A little bit of Wrx, a little bit of 2.5RS, a little bit of STi, a LOT of SVX!

    Will I ever supercharge this Eg33???


    Quote Originally Posted by chuckthefuk
    Cheers and the Baja is not the bastard child.. The Legacy is :-D -Chuck

  4. #4
    SLi O.G. d1giPhux's Avatar
    Join Date
    Dec 2005
    Posts
    3,244
    Points
    20,084
    Level
    89
    Points: 20,084, Level: 89
    Level completed: 47%, Points required for next Level: 266
    Achievements:
    10000 Experience PointsO.G.Overdrive

    Re: Recommendations for a buffing tool?

    Yeah.. i sort of want to pick one up for extra power. However.. my car needs a whole damn paint job anyways to look perfect again. LOL
    --99 Legacy GT Limited Edt. (Silver ! )

    99 Subaru Legacy FSM Download:
    http://tinyurl.com/2u8cbx

  5. #5
    Administrator Huffer's Avatar
    Join Date
    Sep 2005
    Location
    Eastlake, OH / Wellington, NZ
    Posts
    13,377
    Points
    44,297
    Level
    100
    Points: 44,297, Level: 100
    Level completed: 0%, Points required for next Level: 0
    Achievements:
    25000 Experience PointsO.G.SocialOverdrive

    Re: Recommendations for a buffing tool?

    Thanks for the tips guys! Off to HF I go!
    - Roger - Site Admin
    My signature is now a shout-out to the SLi veterans who keep this site flowing with good knowledge and informative opinion. You KNOW who you are, so keep it up!
    USDM 04 LL Bean H6 Wagon - TANK
    USDM 98 GT Wagon - Pandgrish - RIP; USDM 98 GT Sedan - 216k RIP; NZDM 99 GF8 - retired
    USDM 07 Honda Odyssey - Mrs Huffer;
    Live Like No One Else - Debt Free

  6. #6
    SLi O.G. httrdd's Avatar
    Join Date
    Sep 2009
    Location
    NEPA
    Posts
    2,700
    Points
    11,761
    Level
    71
    Points: 11,761, Level: 71
    Level completed: 28%, Points required for next Level: 289
    Achievements:
    10000 Experience PointsO.G.

    Re: Recommendations for a buffing tool?

    Find a 20% off coupon in some magazine or online.
    TJ

    99 LGT H6 Limited OBP

    A little bit of Wrx, a little bit of 2.5RS, a little bit of STi, a LOT of SVX!

    Will I ever supercharge this Eg33???


    Quote Originally Posted by chuckthefuk
    Cheers and the Baja is not the bastard child.. The Legacy is :-D -Chuck

  7. #7
    Administrator Huffer's Avatar
    Join Date
    Sep 2005
    Location
    Eastlake, OH / Wellington, NZ
    Posts
    13,377
    Points
    44,297
    Level
    100
    Points: 44,297, Level: 100
    Level completed: 0%, Points required for next Level: 0
    Achievements:
    25000 Experience PointsO.G.SocialOverdrive

    Re: Recommendations for a buffing tool?

    That HF tool is going to be on sale in a couple of weeks:
    http://bfads.net/Ad/Harbor-Freight-2011#AdscanPage2

    $30 instead of the RRP of $40

    I'm thinking about trying a Powerball variant... I already have a great power drill so I can just use the Powerball 4Paint attachment.
    - Roger - Site Admin
    My signature is now a shout-out to the SLi veterans who keep this site flowing with good knowledge and informative opinion. You KNOW who you are, so keep it up!
    USDM 04 LL Bean H6 Wagon - TANK
    USDM 98 GT Wagon - Pandgrish - RIP; USDM 98 GT Sedan - 216k RIP; NZDM 99 GF8 - retired
    USDM 07 Honda Odyssey - Mrs Huffer;
    Live Like No One Else - Debt Free

  8. #8
    SLi O.G. httrdd's Avatar
    Join Date
    Sep 2009
    Location
    NEPA
    Posts
    2,700
    Points
    11,761
    Level
    71
    Points: 11,761, Level: 71
    Level completed: 28%, Points required for next Level: 289
    Achievements:
    10000 Experience PointsO.G.

    Re: Recommendations for a buffing tool?

    Yea but you wont get the rpm range you can get with one of these. I am buying one this week. Tired of buffing by hand.
    TJ

    99 LGT H6 Limited OBP

    A little bit of Wrx, a little bit of 2.5RS, a little bit of STi, a LOT of SVX!

    Will I ever supercharge this Eg33???


    Quote Originally Posted by chuckthefuk
    Cheers and the Baja is not the bastard child.. The Legacy is :-D -Chuck

  9. #9
    Administrator Huffer's Avatar
    Join Date
    Sep 2005
    Location
    Eastlake, OH / Wellington, NZ
    Posts
    13,377
    Points
    44,297
    Level
    100
    Points: 44,297, Level: 100
    Level completed: 0%, Points required for next Level: 0
    Achievements:
    25000 Experience PointsO.G.SocialOverdrive

    Re: Recommendations for a buffing tool?

    Good point. The drill gets up to 175ft/lbs of torque. I don't know RPM range of the drill.
    - Roger - Site Admin
    My signature is now a shout-out to the SLi veterans who keep this site flowing with good knowledge and informative opinion. You KNOW who you are, so keep it up!
    USDM 04 LL Bean H6 Wagon - TANK
    USDM 98 GT Wagon - Pandgrish - RIP; USDM 98 GT Sedan - 216k RIP; NZDM 99 GF8 - retired
    USDM 07 Honda Odyssey - Mrs Huffer;
    Live Like No One Else - Debt Free

  10. #10
    SLi O.G. httrdd's Avatar
    Join Date
    Sep 2009
    Location
    NEPA
    Posts
    2,700
    Points
    11,761
    Level
    71
    Points: 11,761, Level: 71
    Level completed: 28%, Points required for next Level: 289
    Achievements:
    10000 Experience PointsO.G.

    Re: Recommendations for a buffing tool?

    HF buffer is 200-3377 RPM and a HF cordless 18vlt is 0-900 RPM. The guys on Meguires forum recomended 1500-1700 rpms so you dont burn through. Plus the amgle of the DA is so much more comfortable and easier to corner.
    TJ

    99 LGT H6 Limited OBP

    A little bit of Wrx, a little bit of 2.5RS, a little bit of STi, a LOT of SVX!

    Will I ever supercharge this Eg33???


    Quote Originally Posted by chuckthefuk
    Cheers and the Baja is not the bastard child.. The Legacy is :-D -Chuck

  11. #11
    SLi Resident redlegacygt's Avatar
    Join Date
    Apr 2005
    Location
    Danville, Pa
    Posts
    932
    Points
    12,321
    Level
    72
    Points: 12,321, Level: 72
    Level completed: 68%, Points required for next Level: 129
    Achievements:
    10000 Experience PointsO.G.

    Re: Recommendations for a buffing tool?

    i would recommend the porter cable 7424 which is the DA of choice for most detailer's but its prob. a little more money then your looking to spend. I have one an its really nice. If you watch on ebay you can find used ones for cheaper.
    97 Legacy GT

  12. #12
    SLi Lurker bulldozer24's Avatar
    Join Date
    Jul 2010
    Location
    Boone, North Carolina
    Posts
    342
    Points
    5,198
    Level
    46
    Points: 5,198, Level: 46
    Level completed: 24%, Points required for next Level: 152
    Achievements:
    O.G.5000 Experience Points

    Re: Recommendations for a buffing tool?

    i have the meguiars da and i love it, it was a little pricey but i detail cars on the side so it paid for its self in no time.
    99 Legacy SUS

  13. #13
    Super Moderator Dead91silvia's Avatar
    Join Date
    Oct 2009
    Location
    Auburn, WA USA
    Posts
    5,050
    Points
    28,025
    Level
    98
    Points: 28,025, Level: 98
    Level completed: 68%, Points required for next Level: 325
    Achievements:
    O.G.Tagger Second ClassSocialOverdriveRecommendation Second Class
    Awards:
    Posting Award

    Re: Recommendations for a buffing tool?

    I have had a Makita for over 10 years! It's a beast, never have had a problem with it. I cant tell you how many cars have a bit more shine because of it!

    Only boss has a Dewalt. I liked the fact you could change the handle positions, but its not as reliable as my Makita...

  14. #14
    t3h ch33se Wiscon_Mark's Avatar
    Join Date
    May 2005
    Location
    Plover, WI
    Posts
    9,857
    Points
    43,397
    Level
    100
    Points: 43,397, Level: 100
    Level completed: 0%, Points required for next Level: 0
    Achievements:
    25000 Experience PointsO.G.Overdrive

    Re: Recommendations for a buffing tool?

    I just coughed up 130 bucks for the Porter Cable 7424 random orbit buffer and I have to say, it's very good! Removing excess wax was damn easy and it put it on very evenly.

    Now I have to look into a cutting compound & attachment for removing the little rust flakes on the clear coat from metal debris on the road. Silver shows that stuff up close really easily.

    One question. How do people clean the buffer pad? It got pretty dirty (even after the car wash).
    ~Mark [SLi Admin]
    2015 Dodge Charger AWD
    2008 Subaru Tribeca Limited, 7 passenger w/ Navigation

    Former vehicles:
    03 Forester
    95 Legacy Outback

  15. #15
    SLi Lurker bulldozer24's Avatar
    Join Date
    Jul 2010
    Location
    Boone, North Carolina
    Posts
    342
    Points
    5,198
    Level
    46
    Points: 5,198, Level: 46
    Level completed: 24%, Points required for next Level: 152
    Achievements:
    O.G.5000 Experience Points

    Re: Recommendations for a buffing tool?

    all of that stuff on the pad is bonded contaminants, i usually wash mine out with a good dish soap but some pads can be machine washed. And some advice for every one detailing their car for the first time use a clay bar to remove all of those bonded contaminants then proceed with compounding, polishing, and then waxing.
    99 Legacy SUS

  16. #16
    t3h ub3r m3mber Thomistopheles's Avatar
    Join Date
    Apr 2012
    Location
    Madison, WI
    Posts
    1,366
    Points
    9,783
    Level
    66
    Points: 9,783, Level: 66
    Level completed: 34%, Points required for next Level: 267
    Achievements:
    5000 Experience PointsVeteran

    Re: Recommendations for a buffing tool?

    You need to decontaminate the paint completely before your pad goes anywhere near the paint. A thorough wash, strip the wax, then clay bar. After that the only thing that will clog your pads is removed material (and excess compound). I use a conditioning brush to freshen my pads up when they're loaded up mid-detail. After the job's done, I wash them by hand using a special detergent that will not leave any residue and agitate using the conditioning brush, Dry them with the hook and loop side of the pad facing up so the water won't drain onto the adhesive holding it on the pad material.
    97 BD GT - Baller Husky Hauler II
    06 OBXT Limited - Baller Husky Hauler III
    Quote Originally Posted by nikolaus.conrad
    I have the strangest urge to lick your car, and rub my face on it...

  17. #17
    SLi O.G. d1giPhux's Avatar
    Join Date
    Dec 2005
    Posts
    3,244
    Points
    20,084
    Level
    89
    Points: 20,084, Level: 89
    Level completed: 47%, Points required for next Level: 266
    Achievements:
    10000 Experience PointsO.G.Overdrive

    Re: Recommendations for a buffing tool?

    A product like this:

    http://www.superiorcarcare.net/snappytool.html


    That stuff works great. Makes fast work of cleaning the crap off the pads. Plus the comb/brush that the other guys were talking about.
    --99 Legacy GT Limited Edt. (Silver ! )

    99 Subaru Legacy FSM Download:
    http://tinyurl.com/2u8cbx

  18. #18
    Th3 EviL OvErLORd Reason's Avatar
    Join Date
    Apr 2005
    Location
    Rhode Island U.S. of A(wesome)!
    Posts
    10,388
    Points
    57,313
    Level
    100
    Points: 57,313, Level: 100
    Level completed: 0%, Points required for next Level: 0
    Achievements:
    O.G.SocialOverdrive50000 Experience Points

    Re: Recommendations for a buffing tool?

    Unless you plan on using it everyday I wouldn't go too fancy. I polished the frame on my motorcycle with a hand drill and a 6" attachment, and then muscle power. I don't think I spent more than $15 for what I needed and it came out tits. Look for my 93 GSXR thread and you will see.
    4Zero1 Motorsports

    2010 BM GT
    1998 BD L EJ25/EJ22 High Compression
    1993 GSX-R 750 (version 2.0)
    1993 Suzuki GSX-R 750
    1998 BK L PARTED
    1991 Legacy SS SOLD
    1997 BD GT R.I.P. 12/24/06 Running Mean with 117 whp!
    1989 Honda CR-X A.K.A. "The Beast"
    1991 Suzuki GSX-R 750 R.I.P. 11/10/06

    SLi Facebook
    4Zero1Motorsports Facebook

    "No matter how much you've done, or how successful you've been, there's always more to do, always more to learn, and always more to achieve." - Barack Obama

  19. #19
    Super Moderator Dead91silvia's Avatar
    Join Date
    Oct 2009
    Location
    Auburn, WA USA
    Posts
    5,050
    Points
    28,025
    Level
    98
    Points: 28,025, Level: 98
    Level completed: 68%, Points required for next Level: 325
    Achievements:
    O.G.Tagger Second ClassSocialOverdriveRecommendation Second Class
    Awards:
    Posting Award

    Re: Recommendations for a buffing tool?

    There are so many methods for doing this... As well as different tools...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •