Page 2 of 2 FirstFirst 12
Results 31 to 55 of 55

Thread: Parts interchange!

  1. #31
    New User Thatguy559's Avatar
    Join Date
    Mar 2013
    Location
    Fresno, CA
    Posts
    21
    Points
    1,516
    Level
    22
    Points: 1,516, Level: 22
    Level completed: 16%, Points required for next Level: 84
    Achievements:
    1 year registered1000 Experience Points

    Re: Parts interchange!

    Quote Originally Posted by Snow Wolf
    Quote Originally Posted by Dead91silvia
    Reserved for future use for WILL IT WORK and AFTERMARKET PERFORMANCE

    Aftermarket... Like springs, swap bars, body kits, wings, seats...

    Crazy interchanges no one knows... Like a Tribeca bar on a BD...

    Will it work... Such as "what do I do to make STi struts work?" or "can I install Impreza seats in my car?" goes here... I know a ton of those threads are out there. Post them here, or PM me and I'll update it. It would be nice to have a one thread go to for this vast amount of knowledge we have on this forum!

    I have already got some help from other members, feel free to pitch in, or correct me if I'm wrong, I'm gonna need a lot of help figuring this stuff out. I know some, but very little!

    Springs!
    On the good list: Whiteline, H&R
    Bad list: Tein S-tech


    Hybrid spring swaps:
    STI-Link?
    WRX-Link?

    Swaybars:
    Rally Tech


    OEM Stereo interchanges:
    Impreza up to 2007
    Forester up to 2008
    Legacy up to 2004 (2005 and up incoprerated into dash/HAVC)

    Hybrid:
    02-03 GT bar on 2nd gen Cheap (part #20401AE03A) http://www.sl-i.net/FORUM/viewtopic.php?f=13&t=21211
    Tribeca bar link?

    I know this is probably too late to be of any help to anyone but STI springs should fit BE/BH Legacys. Whiteline do swaybars and I highly recommend them 9had 24mm heavy duty one in my 2.5 BD Legacy)
    I have a 03 Legacy L SE , so you are saying STi Springs from this year will fit?
    '03 Legacy L SE Wagon - Current
    '97 Chevy Blazer - at a better home
    '93 Accord Sedan - at a better home
    '85 RX-7 - RIP
    '86 RX-7 - better home
    '85 RX-7 - POPO got her
    '86 Nissan 300ZX - First One i Bought
    '61 Chevy Bel Air Bubble top - First Car (given to me)

  2. #32
    "FNG"
    Join Date
    May 2012
    Location
    N.Seattle
    Posts
    86
    Points
    3,981
    Level
    40
    Points: 3,981, Level: 40
    Level completed: 16%, Points required for next Level: 169
    Achievements:
    1000 Experience PointsVeteran

    Re: Parts interchange!

    Quote Originally Posted by Dead91silvia

    95 2.2's are OBD 1.
    this is a pretty big thing to get incorrect for new users that actually read the stickys, ha

  3. #33
    SLi nOOb
    Join Date
    Jun 2012
    Location
    Christchurch, NEW ZEALAND
    Posts
    132
    Points
    4,328
    Level
    41
    Points: 4,328, Level: 41
    Level completed: 89%, Points required for next Level: 22
    Achievements:
    1000 Experience PointsVeteran

    Re: Parts interchange!

    Apparently the fronts will fit. The backs no unfortunately

    http://www.clubsub.org.nz/forum/index.p ... #msg471105

    hope this helps
    Yes officer, I did hit a pedestrian, but instead of dwelling on that why not focus on how many I've missed?

  4. #34
    Super Moderator Dead91silvia's Avatar
    Join Date
    Oct 2009
    Location
    Auburn, WA USA
    Posts
    5,050
    Points
    28,025
    Level
    98
    Points: 28,025, Level: 98
    Level completed: 68%, Points required for next Level: 325
    Achievements:
    O.G.Tagger Second ClassSocialOverdriveRecommendation Second Class
    Awards:
    Posting Award

    Re: Parts interchange!

    Quote Originally Posted by couchfuzzy
    Quote Originally Posted by Dead91silvia

    95 2.2's are OBD 1.
    this is a pretty big thing to get incorrect for new users that actually read the stickys, ha
    This is not incorrect, it's still up for debate. I have seen them both ways, just like my 96 L that was OBD I.

    EDIT: Updated info with a "Note" about possible differences.

  5. #35
    New User
    Join Date
    Jan 2013
    Posts
    15
    Points
    1,597
    Level
    22
    Points: 1,597, Level: 22
    Level completed: 97%, Points required for next Level: 3
    Achievements:
    1 year registered1000 Experience Points

    Re: Parts interchange!

    will 1999 ra wrx brake discs and calipers fit on my 2000 Legacy blitzen

  6. #36
    Super Moderator Dead91silvia's Avatar
    Join Date
    Oct 2009
    Location
    Auburn, WA USA
    Posts
    5,050
    Points
    28,025
    Level
    98
    Points: 28,025, Level: 98
    Level completed: 68%, Points required for next Level: 325
    Achievements:
    O.G.Tagger Second ClassSocialOverdriveRecommendation Second Class
    Awards:
    Posting Award

    Re: Parts interchange!

    I have no idea... haha...

    Someone might know that one thought. I think they will bolt on, but I'm not 100% sure.

  7. #37
    "Proby" Rubie_25GT's Avatar
    Join Date
    Mar 2011
    Location
    Ellicott city, MD
    Posts
    218
    Points
    8,622
    Level
    62
    Points: 8,622, Level: 62
    Level completed: 58%, Points required for next Level: 128
    Achievements:
    Social5000 Experience PointsO.G.

    Re: Parts interchange!

    Quote Originally Posted by Dead91silvia
    95-99 rear seats (Wagon only)
    95-99 Rear seats (sedan only)
    I have today proven this false lol sorry. I have a wagon fold up seat in the rear. Just needed slightly longer bolts from home depot

    Sorry for the crappy cell phone image
    1999 Legacy GT - (Rubie)
    1974 VW Super Beetle - (Beetleru)
    1996 Subaru SVX LSI - (Fat Stacey) SOLD

    If you can't beat them, BLIND THEM.

    Like my Facebook page at:
    https://www.facebook.com/TJDgraphic
    to see some of my pictures and videos.

  8. #38
    Super Moderator Dead91silvia's Avatar
    Join Date
    Oct 2009
    Location
    Auburn, WA USA
    Posts
    5,050
    Points
    28,025
    Level
    98
    Points: 28,025, Level: 98
    Level completed: 68%, Points required for next Level: 325
    Achievements:
    O.G.Tagger Second ClassSocialOverdriveRecommendation Second Class
    Awards:
    Posting Award

    Re: Parts interchange!

    The bottom's might swap, but the Rear/upper is a no for sure. Though I'm sure you could make it work, it will never fit right.

  9. #39
    "Proby" Rubie_25GT's Avatar
    Join Date
    Mar 2011
    Location
    Ellicott city, MD
    Posts
    218
    Points
    8,622
    Level
    62
    Points: 8,622, Level: 62
    Level completed: 58%, Points required for next Level: 128
    Achievements:
    Social5000 Experience PointsO.G.

    Re: Parts interchange!

    yeeah I wouldn't see a point to swapping the tops anyways. They both function the same...
    1999 Legacy GT - (Rubie)
    1974 VW Super Beetle - (Beetleru)
    1996 Subaru SVX LSI - (Fat Stacey) SOLD

    If you can't beat them, BLIND THEM.

    Like my Facebook page at:
    https://www.facebook.com/TJDgraphic
    to see some of my pictures and videos.

  10. #40
    "FNG" Scimitar's Avatar
    Join Date
    Oct 2010
    Location
    Hampton Roads, VA
    Posts
    33
    Points
    3,675
    Level
    38
    Points: 3,675, Level: 38
    Level completed: 17%, Points required for next Level: 125
    Achievements:
    Veteran1000 Experience Points

    Re: Parts interchange!

    Okay, here's a question that I haven't found an answer to yet. Will older seats from a '95-'99 Outback wagon work in a '00-'04 Outback wagon?

    Only reason I ask is because I have a perfect set of seats from my wrecked '99, and could use them in a newer Outback I'm looking at (5-speed, low miles) that has a nice tear in the driver seat.

  11. #41
    Super Moderator Dead91silvia's Avatar
    Join Date
    Oct 2009
    Location
    Auburn, WA USA
    Posts
    5,050
    Points
    28,025
    Level
    98
    Points: 28,025, Level: 98
    Level completed: 68%, Points required for next Level: 325
    Achievements:
    O.G.Tagger Second ClassSocialOverdriveRecommendation Second Class
    Awards:
    Posting Award

    Re: Parts interchange!

    I have a feeling no, but you could be the first to try and see if it does. Mainly because the rear strut towers are completely different.

  12. #42
    "FNG" Scimitar's Avatar
    Join Date
    Oct 2010
    Location
    Hampton Roads, VA
    Posts
    33
    Points
    3,675
    Level
    38
    Points: 3,675, Level: 38
    Level completed: 17%, Points required for next Level: 125
    Achievements:
    Veteran1000 Experience Points

    Re: Parts interchange!

    Good point, I didn't think about the difference in the rear strut towers.

  13. #43
    "Proby" teeceRS's Avatar
    Join Date
    Dec 2013
    Location
    North Carolina
    Posts
    222
    Points
    1,739
    Level
    24
    Points: 1,739, Level: 24
    Level completed: 39%, Points required for next Level: 61
    Achievements:
    1 year registered1000 Experience Points

    Re: Parts interchange!

    has anyone tried 02-03 wrx door panels in 00-04 legacy?
    Don’t tell me the sky is the limit. If there are footprints on the moon!

    '00 Impreza 2.5RS (Sold)
    Black Sheep | Legacy BH9 with a twist

  14. #44
    Super Moderator Dead91silvia's Avatar
    Join Date
    Oct 2009
    Location
    Auburn, WA USA
    Posts
    5,050
    Points
    28,025
    Level
    98
    Points: 28,025, Level: 98
    Level completed: 68%, Points required for next Level: 325
    Achievements:
    O.G.Tagger Second ClassSocialOverdriveRecommendation Second Class
    Awards:
    Posting Award

    Re: Parts interchange!

    I doubt it, but you could give it a try.

  15. #45
    "Proby" Danny-G's Avatar
    Join Date
    Oct 2010
    Posts
    264
    Points
    3,764
    Level
    38
    Points: 3,764, Level: 38
    Level completed: 76%, Points required for next Level: 36
    Achievements:
    Veteran1000 Experience Points

    Re: Parts interchange!

    For the first gen, 89-91 tails are different from 92-94 (note) 92 tails are slightly different than 93-94 (< sedan). All first gen wagon tails will swap 89-94. Front seats swap through all years (not including trim level differences), the wagon rear seat bottom will bolt into a sedan. 89-92 have idiot lights in different areas than the 93-94. 89-92 are non airbag, 93-94 has it. Doors will swap through the years, rear glass is different from wagon to sedan. Engine wise 89-90 22e only, 91-94 was 22e or 22t depending on model. Front struts will swap 89-94, rears 89-91 and 92-94.

    I'll add more later on, its getting late.
    Danny

    1993 Legacy LS AWD: 4eat, mostly stock, going SUS, higher mileage, turbo grille, and lots of one off additions. (Mine)
    1994 Turbo Wagon: bone stock other than a snorkus delete and aftermarket stero. (Mine)
    1997 Outback: 5mt, winter package, tinted windows, tow bar with wiring, and slowly becoming a limited. (Moms)
    Quote Originally Posted by 1996Battlewagon
    Even still, just go to the guy's place, kick his face in, take your "WRX" and raid his fridge so he can't have breakfast.

  16. #46
    SLi nOOb yaya's Avatar
    Join Date
    Apr 2013
    Location
    ct
    Posts
    179
    Points
    3,932
    Level
    39
    Points: 3,932, Level: 39
    Level completed: 88%, Points required for next Level: 18
    Achievements:
    1000 Experience PointsVeteran

    Re: Parts interchange!

    My rear subframe on my 01 Legacy is in bad shape. I will be doing some work to replace some suspension parts soon and wouldn't mind swapping the entire rear crossmember. I know 00-04 are a direct swap, but in my search I'm curious if I could use a 4th gen crossmember from a car being parted out.

  17. #47
    SLi Resident 86bratman's Avatar
    Join Date
    Jul 2013
    Location
    Tazewell VA
    Posts
    739
    Points
    4,313
    Level
    41
    Points: 4,313, Level: 41
    Level completed: 82%, Points required for next Level: 37
    Achievements:
    1000 Experience PointsOverdriveVeteran

    Re: Parts interchange!

    The 4th gen is similar, but I'd hesitate to say whether you could make it work or not. I'd lean towards no.
    My 1997 Legacy L

    Fuelly

  18. #48
    SLi nOOb yaya's Avatar
    Join Date
    Apr 2013
    Location
    ct
    Posts
    179
    Points
    3,932
    Level
    39
    Points: 3,932, Level: 39
    Level completed: 88%, Points required for next Level: 18
    Achievements:
    1000 Experience PointsVeteran

    Re: Parts interchange!

    That is what I'm thinking too, just wasn't sure if anyone could confirm that it does or does not work.

  19. #49
    SLi Resident 86bratman's Avatar
    Join Date
    Jul 2013
    Location
    Tazewell VA
    Posts
    739
    Points
    4,313
    Level
    41
    Points: 4,313, Level: 41
    Level completed: 82%, Points required for next Level: 37
    Achievements:
    1000 Experience PointsOverdriveVeteran

    Re: Parts interchange!

    Not sure where you're from, but there was a recall on the rear suspension on 00-early 02 legacy for rust issues. Might not be covered anymore but some info can be found here http://www.cars101.com/recalls.html

    April 30, 2003 some 2000-2003 Legacy, Outback, Baja possible rear suspension corrosion problem Subaru has announced a voluntary recall on certain 2000-2001 models, some 2002 models, and very early production 2003 models including Subaru Legacy, Outback, and Baja vehicles in "salt-belt" states to address a possible rear suspension corrosion problem.
    This involves Legacy, Outback, and early Bajas, 2000 through 2001, some 2002 models, and approximately 45 very early production 2003 vehicles. The vehicles were produced between May 1, 1999 and April 30, 2002. Approximately 170,000 vehicles are potentially affected in the "salt belt" region. This recall will include vehicles originally sold and/or currently registered in the states of CT, DE, DC, IA, IL, IN, KY, ME, MA, MD, MI, MN, MO, NH, NJ, NY, OH, PA, RI,VT, VA, WV, and WI.
    My 1997 Legacy L

    Fuelly

  20. #50
    SLi nOOb yaya's Avatar
    Join Date
    Apr 2013
    Location
    ct
    Posts
    179
    Points
    3,932
    Level
    39
    Points: 3,932, Level: 39
    Level completed: 88%, Points required for next Level: 18
    Achievements:
    1000 Experience PointsVeteran

    Re: Parts interchange!

    That would cover me. Might call the dealer to see what they would offer for a fix. Thanks!

  21. #51
    SLi Resident 86bratman's Avatar
    Join Date
    Jul 2013
    Location
    Tazewell VA
    Posts
    739
    Points
    4,313
    Level
    41
    Points: 4,313, Level: 41
    Level completed: 82%, Points required for next Level: 37
    Achievements:
    1000 Experience PointsOverdriveVeteran

    Re: Parts interchange!

    No problem, hopefully they'll be able to help you out.
    My 1997 Legacy L

    Fuelly

  22. #52
    "FNG"
    Join Date
    Dec 2006
    Location
    Hawaii
    Posts
    64
    Points
    7,794
    Level
    59
    Points: 7,794, Level: 59
    Level completed: 22%, Points required for next Level: 156
    Achievements:
    5000 Experience PointsO.G.
    Quote Originally Posted by Danny-G View Post
    For the first gen, . . . 89-92 are non airbag, 93-94 has it. . . . Front struts will swap 89-94.
    Just a refinement: Some of the later-produced 92's had the four spoke steering wheel with the airbag. 92-94 front struts had different ride heights from the 90-91.

  23. #53
    New User
    Join Date
    May 2020
    Location
    Renton, WA
    Posts
    3
    Points
    1
    Level
    1
    Points: 1, Level: 1
    Level completed: 0%, Points required for next Level: 1
    Looking for a little help on if i can fit 04 sti front seats into my BH, Also trying to figure out what rear seat swap works for the BH.

    Can't find much info for seat swaps on the BH line.

  24. #54
    New User
    Join Date
    Apr 2021
    Location
    BC, Canada
    Posts
    2
    Points
    1
    Level
    1
    Points: 1, Level: 1
    Level completed: 0%, Points required for next Level: 1
    First off thank you for this heaps of information. But I was looking for info on a front bumper specifically a 2000 B4 RSK BE5 front bumper. I see that you provided a link to the information on that but it seems as the link does not work anymore. Any help would be great.

    Thank you.

  25. #55
    Administrator rkrenicki's Avatar
    Join Date
    Jun 2009
    Location
    Southeastern CT
    Posts
    2,823
    Points
    23,967
    Level
    94
    Points: 23,967, Level: 94
    Level completed: 62%, Points required for next Level: 383
    Achievements:
    10000 Experience PointsO.G.SocialOverdrive
    Quote Originally Posted by Prevo View Post
    First off thank you for this heaps of information. But I was looking for info on a front bumper specifically a 2000 B4 RSK BE5 front bumper. I see that you provided a link to the information on that but it seems as the link does not work anymore. Any help would be great.

    Thank you.
    The Japanese 1998-early 2001 bumper is the same shape as any north american 2000-2004 bumper. If you just need "something", then you can use any of those but they will have a different design. If you want a bumper of the same design, then you will need to get one from another 1998-early 2001 Japanese legacy.
    2020 WMA Ascent Limited
    1992 KS4 Sambar SDX S/C - JDM Kei Truck
    2017 BN9 Legacy 2.5i Premium Eyesight - Wife's car
    2013 GP7 Impreza Sport - Daughter's car
    Retired: 2010 SH9 Forester | 2004 BEE Outback | 1996 BG9 Outback | 1993 BJ6 Legacy | 1998 SF9 Forester

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •