*****WARNING! These are measurements I took and are not completly accurate. These are only to be used as a guide. I am not responsible for anyone mangling their bumper.
Expect to put a lot of hours into this. I took it slow and I put about 12 hours into finishing everything up.
If any parts need clarification then please tell me and I will fix it!
Post 1 - General info
Post 2 - Removing bumper
Post 3 - Cutting bumper
Post 4 - Bracket & bumper beam modification
Post 5 - Mounting
Post 6 - Wiring
Post 7 - Finished product
Tools
-needle nose pliers
-phillips screwdriver
-10mm socket and wrench
-flathead screwdriver
-hacksaw blade
-file
-wire cutters and crimpers
materials
-JDM foglights
-16 or less guage wire
-various wiring connections
-Approx 1" 5/16" bolts and nuts
-lock washers
-masking tape
-electrical tape