Subaru Connector Sources

[rkrenicki]

I have spent quite a bit of time finding connectors for one thing or another in my car .. I figured I should start a thread to keep all of the information in one place and to share it with everyone here.

I am going to put these into a few posts to keep it organized by generation, and I will add whatever I find going forward. If you have anything to add to this list, please let me know, and I will add it to the first few posts!

[rkrenicki]

Placeholder for First Generation Legacy connectors.

[rkrenicki]

Placeholder for Second Generation Legacy connectors.

[rkrenicki]

This is a list of part numbers and purchasing links for connectors in the BE/BH/BT models.

30 pin plug: JAE IL-AG5-30S-D3C1 All market A/i10 Plug
16 pin plug: JAE IL-AG5-16S-D3C1 All market B/i11 Plug
18 pin plug: JAE IL-AG5-18S-D3C1 JDM/AUDM/UKDM/EDM D-type C/i12 plug
14 pin plug: JAE IL-AG5-14S-D3C1 All other Type/Markets C/i12 Plug

Pins for the above plugs: JAE IL-AG5 Plug contacts


30 pin Socket: JAE IL-AG5-30P-D3L2
16 pin Socket: JAE IL-AG5-16P-D3L2
14 pin Socket: JAE IL-AG5-14P-D3L2

HID Servo connector: Sumitomo 6189-0179 All Types (Toyota Part number 90980-11016)
HID Servo connector: 3P090WP-TS-F-Tri All Types (Alternate Vendor)

HID Leveler Switch connector: Yazaki 7283-8660, 91 Type A-series (0.8mm contact) 6 pole. (no source found for this connector yet)

GT/Outback Headlight connectors:
Male (Headlight Side): Sumitomo 6187-3281 Contacts (You need 3) (Toyota Part number 90980-10500)
Female (Car harness side): Sumitomo 6180-3261 Contacts (You need 3) (Toyota Part number 90980-10501)
Both sides (Alternate Vendor): 3P090WP-MT-SPA

JDM HID Headlight connectors: (Datasheet) (no source found for these connectors yet)
Male (Headlight side): Yazaki 7222-6244-40 [AKA X04MGY] Contacts: 7114–2873
Female (Car harness side): Yazaki 7123-6244-40 [AKA X04FGY] Contacts: 7116–2873

[rkrenicki]

22 pin plug: JAE IL-AG5-22S-D3C1 A/i10 Plug
14 pin plug: JAE IL-AG5-14S-D3C1 B/i11 Plug

Pins for the above plugs: JAE IL-AG5 Plug contacts

22 pin Socket: JAE IL-AG5-22P-D3L2
14 pin Socket: JAE IL-AG5-14P-D3L2

i88 Car side Plug: TE Multilock 174044-2 Contacts:173681-1
i88 Panel side Socket: Vertical Type: TE Multilock 174971-2 Horizontal Type: TE Multilock 174049-2

This is the connector for the steering wheel controls and stock Subwoofer:
i85 Car side Plug: TE Multilock 174044-2 Contacts:173681-1
i85 Panel side Socket: Vertical Type: TE Multilock 174971-2 Horizontal Type: TE Multilock 174049-2

This is the connector for the Clock:
i59 Car side Plug: Female 10P040 (Comes with contacts from this seller)
i59 Panel side Socket: Male 10P040 (Comes with contacts from this seller)

[rkrenicki]

Placeholder for Fifth Generation Legacy connectors.

[rkrenicki]

Placeholder for the possibility of a sixth generation in the future?

[rkrenicki]

Placeholder for other Subaru model connectors. Impreza, Forester, Tribeca, Exiga, Sambar, Pleo, etc.

[r3v_v3ng3]

This is going to be an awesome thread for those thats sourcing connectors. Thanks for sharing

[Yamazaki]

I LOVE this thread already.
I will add my "special" information after I am done.

[rkrenicki]

I added some 4th gen stuff today.

[Wiscon_Mark]

Right on, I'll add this to threads of note.

[chrish8r]

Ae64.com sells a whole bunch of radio harnesses. Thats where i bought my forward sub harness for my 2nd gen wagon.

It might be useful for the radio portion of your info.

[rkrenicki]

Oh, I havent even looked at most of the radio stuff.. but I did stumble across the main connector for 2nd-4th gen the other day. I did not put it on here because I figured it was common enough, but I will see if I can find it again.

I did *FINALLY* find the connectors for the 3rd gen JDM Headlights, and the HID leveler switch. I have not yet found a good place to buy them, but I did at least find the correct part number.

[camroncamera]

Oh, I havent even looked at most of the radio stuff.. but I did stumble across the main connector for 2nd-4th gen the other day. I did not put it on here because I figured it was common enough, but I will see if I can find it again.

I did *FINALLY* find the connectors for the 3rd gen JDM Headlights, and the HID leveler switch. I have not yet found a good place to buy them, but I did at least find the correct part number.

Thank you for this resource. I personally know how much time and work it takes to track down these connectors! You may find more info on USDM and JDM headlight connectors for 2nd-gen Legacies here:
https://sl-i.net/FORUM/viewtopic.php?f=10&t=24288

[subaru legacy 2005]

:smt002 thank you guy for having the part # for Subaru legacy GT 2005 I88 connecter and pin contact

[86bratman]

I know this is kinda older, but anybody know a source for the 5mt neutral and reverse switches, of than a junkyard (manual subarus are rare in these parts)

[rkrenicki]

For what car? I will do some research, but I think they use different ones for different generations.

Sent from my Nexus 5 using Tapatalk

[86bratman]

Trans I'm working with on this one is from an 05 impreza, they look the same as second gen legacy to me.

[thesavo]

I am back from u pull in East Syracuse. 86Bratman . I got them form a manual shift 1998 MY Legacy. Grey and brown. They look like their from the same sealed connector series to me.

http://s1344.photobucket.com/user/thesa ... -MTXswitch

http://s1344.photobucket.com/user/thesa ... ral_safety

http://s1344.photobucket.com/user/thesa ... ch/Reverse

[colbh5]

do you have any new info on where to find this? Yazaki 7283-8660, 91 Type A-series

[rkrenicki]

No, I have tried a handful of times since I posted that part number, but with no luck.

[colbh5]

Damn! hopefully the switch I am getting has it, if not oh well.

[thesavo]

Damn! hopefully the switch I am getting has it, if not oh well.

Looks like United race tech has them. I am sure without terminals.

http://www.newunitedracetech.com/shop/y ... _1431_1434

Unfortunately, it has a minimum quantity order of 100. Perhaps a group buy is nessesary.

If anyone can format a phone number, you can try to inquire here.
http://www.eleocean.com/productsview.asp?id=1148

They didn't like how I filled the form.

[rkrenicki]

Well yes, I have not been able to locate them without a minimum quantity, or at least a reasonable minimum quantity.

I had contacted EasternBeaver.com, but he was unwilling to stock another connector in his inventory.

[TyrWagon]

Today I bought a Black Faced Meter Cluster, for a very cheap price, but it comes without connectors.

I want to make an engine swap, even if not put a EJ20R or EJ206 and EJ208 engine ... But whatever it is, I want this cluster running on my BG4.

I think it's time to study your threads, thank you!