Results 1 to 20 of 20

Thread: Third Gen Center Console Differences

  1. #1
    Administrator rkrenicki's Avatar
    Join Date
    Jun 2009
    Location
    Southeastern CT
    Posts
    2,818
    Points
    23,967
    Level
    94
    Points: 23,967, Level: 94
    Level completed: 62%, Points required for next Level: 383
    Achievements:
    10000 Experience PointsO.G.SocialOverdrive

    Third Gen Center Console Differences

    I did a quick search and did not see this outlined, so I figured I would post this up here.

    In the third gen, there are two versions of the center console. The most obvious difference is that one has 1 cupholder, and the other has 2. There are a number of other differences as well, which I will outline here.

    This is a picture of the two different kinds side by side. Here you can clearly see the differences in the top. The black one was used for 2000-2002 cars, the beige one was used in the Late 2002-2004 cars. The square hole on the double cupholder version is where the coin holder or heated seat switches would go.
    Name:  IMG_20131016_165541.jpg
Views: 34
Size:  190.8 KB

    The top plate is specific for the center console. This is best shown on these two pictures. Again, this is the earlier 2000-2002 version, you can see where the top plate meets the console at about a 45 degree angle.
    Name:  IMG_20131016_165550.jpg
Views: 33
Size:  171.2 KB

    This again is the Late 2002-2004 version, where you can see that it meets up at nearly a 90 degree angle. It also has a thicker/taller armrest.
    Name:  IMG_20131016_165558.jpg
Views: 34
Size:  172.0 KB

    Here are the two side by side, with the 02-04 in the front. It is quite obvious that the two are vastly different, and you can see the thickness difference of the armrest cover as well.
    Name:  IMG_20131016_165620.jpg
Views: 33
Size:  155.3 KB

    So, the moral of the story here is.. if you want to change a single cupholder for a double.. you will need the entire console. Also if you have heated seats, be aware that the switch locations are different between them, and your wires may not reach without modification.
    2020 WMA Ascent Limited
    1992 KS4 Sambar SDX S/C - JDM Kei Truck
    2017 BN9 Legacy 2.5i Premium Eyesight - Wife's car
    2013 GP7 Impreza Sport - Daughter's car
    Retired: 2010 SH9 Forester | 2004 BEE Outback | 1996 BG9 Outback | 1993 BJ6 Legacy | 1998 SF9 Forester

  2. #2
    New User LegacyPritch's Avatar
    Join Date
    Oct 2013
    Location
    O~Burg Pennsylvania
    Posts
    14
    Points
    1,030
    Level
    17
    Points: 1,030, Level: 17
    Level completed: 30%, Points required for next Level: 70
    Achievements:
    1 year registered1000 Experience Points

    Re: Third Gen Center Console Differences

    Time to find the older one...looks better than the one in mine. No need to have a cup holder for my passenger anyway, they can hold it! Guess I'll be ripping the console out AGAIN.

  3. #3
    Cone Eater
    Join Date
    May 2006
    Location
    NYC
    Posts
    3,592
    Points
    18,003
    Level
    85
    Points: 18,003, Level: 85
    Level completed: 31%, Points required for next Level: 347
    Achievements:
    10000 Experience PointsO.G.
    Awards:
    Discussion Ender

    Re: Third Gen Center Console Differences

    2 cup holder > 1 cup holder. I use the 2nd cup holder to hold small knick-knacks :P

    Oh, they went to the 2 cupholder console because they deleted the center stack cupholder by the HVAC controls in the later models.
    2005 Outback XT
    2003 Legacy L "Special" Edition...RIP CLICK HERE

    GO > Show. Every time.

    STI is the new medically accepted term for STD.

  4. #4
    Administrator rkrenicki's Avatar
    Join Date
    Jun 2009
    Location
    Southeastern CT
    Posts
    2,818
    Points
    23,967
    Level
    94
    Points: 23,967, Level: 94
    Level completed: 62%, Points required for next Level: 383
    Achievements:
    10000 Experience PointsO.G.SocialOverdrive

    Re: Third Gen Center Console Differences

    Yep, unless you do what I did and swap in that stack trim.. Three cupholders FTW!

    Actually, the stack cupholder holds my cellphone perfectly. I use it for when I am streaming pandora or some other music so I can thumb up/down and skip easily.
    2020 WMA Ascent Limited
    1992 KS4 Sambar SDX S/C - JDM Kei Truck
    2017 BN9 Legacy 2.5i Premium Eyesight - Wife's car
    2013 GP7 Impreza Sport - Daughter's car
    Retired: 2010 SH9 Forester | 2004 BEE Outback | 1996 BG9 Outback | 1993 BJ6 Legacy | 1998 SF9 Forester

  5. #5
    "FNG" Bianrox's Avatar
    Join Date
    May 2013
    Location
    New Hampshire
    Posts
    25
    Points
    2,530
    Level
    30
    Points: 2,530, Level: 30
    Level completed: 54%, Points required for next Level: 70
    Achievements:
    1000 Experience PointsTagger Second ClassVeteran

    Re: Third Gen Center Console Differences

    So that trim piece is totally universal? I've been thinking about finding one because 3 cupholders > 2. Also, maybe you could answer this rkrenicki, what is the difference between the heated seat switches?

    Here is my problem, I had my driver side heated seat switch light (green light) burn out. GAH! So I bought the new light bulb, ripped the piece apart and couldn't get it back together. (classic) So, naturally, I threw it all away in a fit of rage. I then went on ebay and immedietly bought a new switch but, its super round. The outback one has some nobbies on it, its a bit more square and it just looks beefier. The one that arrived in the mail was round and... soft. Also, the lights on it didn't work either because that's my luck.

    SO is there a difference between the legacy switch and the outback switch?

    Also, heated seat works fine, the switch works! But, no lights. Not the red, or the green.
    First chair, last call

  6. #6
    Administrator rkrenicki's Avatar
    Join Date
    Jun 2009
    Location
    Southeastern CT
    Posts
    2,818
    Points
    23,967
    Level
    94
    Points: 23,967, Level: 94
    Level completed: 62%, Points required for next Level: 383
    Achievements:
    10000 Experience PointsO.G.SocialOverdrive

    Re: Third Gen Center Console Differences

    No, the top piece is dependent on the bottom piece. If you want to get the double cupholder one in there, you will need the whole center console from a 2003 or 2004 car.

    The switches themselves are the same, but they are in different spots. On the single cupholder it is up near the armrest where the coin holders are in the picture. On the double, it is in between the cupholders and the shifting mechanism. The wiring of the car may not reach from one location to the other without some modification.

    The Legacy and Outback use the same switch for heated seats. Are you sure the one you picked up was for a 3rd gen? Ebay sellers do not necessarily know what they are selling, they may have sold you one from another generation, or even another make.

    For example, I bought a dashboard dimming knob that was labeled as from a 2000 European Legacy GX. When I received it, it would not fit. Turns out it was from a Mazda of some sort.
    2020 WMA Ascent Limited
    1992 KS4 Sambar SDX S/C - JDM Kei Truck
    2017 BN9 Legacy 2.5i Premium Eyesight - Wife's car
    2013 GP7 Impreza Sport - Daughter's car
    Retired: 2010 SH9 Forester | 2004 BEE Outback | 1996 BG9 Outback | 1993 BJ6 Legacy | 1998 SF9 Forester

  7. #7
    "FNG" Asphalt Art's Avatar
    Join Date
    Sep 2013
    Posts
    86
    Points
    2,697
    Level
    31
    Points: 2,697, Level: 31
    Level completed: 65%, Points required for next Level: 53
    Achievements:
    1000 Experience PointsVeteran

    Re: Third Gen Center Console Differences

    For what it is worth, I have an 02 GT wagon with a black (2) cupholder console.

  8. #8
    Administrator rkrenicki's Avatar
    Join Date
    Jun 2009
    Location
    Southeastern CT
    Posts
    2,818
    Points
    23,967
    Level
    94
    Points: 23,967, Level: 94
    Level completed: 62%, Points required for next Level: 383
    Achievements:
    10000 Experience PointsO.G.SocialOverdrive

    Re: Third Gen Center Console Differences

    You know, I was going to update this thread with that.

    When I was at the junkyard on tuesday I saw two different "C" cars (2002 model year). One had the 1 cupholder, the other had the 2 cupholder. It must have been a mid-year transition. I meant to check the production dates on the two cars, but I forgot to before we left.
    2020 WMA Ascent Limited
    1992 KS4 Sambar SDX S/C - JDM Kei Truck
    2017 BN9 Legacy 2.5i Premium Eyesight - Wife's car
    2013 GP7 Impreza Sport - Daughter's car
    Retired: 2010 SH9 Forester | 2004 BEE Outback | 1996 BG9 Outback | 1993 BJ6 Legacy | 1998 SF9 Forester

  9. #9
    "FNG" Asphalt Art's Avatar
    Join Date
    Sep 2013
    Posts
    86
    Points
    2,697
    Level
    31
    Points: 2,697, Level: 31
    Level completed: 65%, Points required for next Level: 53
    Achievements:
    1000 Experience PointsVeteran

    Re: Third Gen Center Console Differences

    My build date is 8/01, and was produced in the U.S. per my door sticker if that helps narrow it down. GT wagon, BGP with charcoal interior. The one in the yard is an 01 with the same interior (1 cupholder)

  10. #10
    SLi nOOb
    Join Date
    Feb 2014
    Posts
    145
    Points
    3,038
    Level
    33
    Points: 3,038, Level: 33
    Level completed: 92%, Points required for next Level: 12
    Achievements:
    1000 Experience PointsVeteran

    Re: Third Gen Center Console Differences

    Question. Did the the 3rd gen Console box lid[Arm rest] come in a taller variety?

    I have a MY 2004 USDM wagon with dual cup-holder model. The lid in this thing feels so damn low. I read that the '96 had "taller one".

  11. #11
    SLi nOOb
    Join Date
    Feb 2014
    Posts
    145
    Points
    3,038
    Level
    33
    Points: 3,038, Level: 33
    Level completed: 92%, Points required for next Level: 12
    Achievements:
    1000 Experience PointsVeteran

    Re: Third Gen Center Console Differences

    I guess the overall hight is the same. Too bad there isn't an easy way to make it taller yet still fit in with the design

    Sent from Tapa talk. Because SEO.

  12. #12
    Administrator rkrenicki's Avatar
    Join Date
    Jun 2009
    Location
    Southeastern CT
    Posts
    2,818
    Points
    23,967
    Level
    94
    Points: 23,967, Level: 94
    Level completed: 62%, Points required for next Level: 383
    Achievements:
    10000 Experience PointsO.G.SocialOverdrive

    Re: Third Gen Center Console Differences

    There is an Armrest Extension that was sold in Japan for the BE/BH platform that should work, but they are exceedingly rare as it was not an overly popular option there.
    2020 WMA Ascent Limited
    1992 KS4 Sambar SDX S/C - JDM Kei Truck
    2017 BN9 Legacy 2.5i Premium Eyesight - Wife's car
    2013 GP7 Impreza Sport - Daughter's car
    Retired: 2010 SH9 Forester | 2004 BEE Outback | 1996 BG9 Outback | 1993 BJ6 Legacy | 1998 SF9 Forester

  13. #13
    Super Moderator amgarrety's Avatar
    Join Date
    Aug 2011
    Location
    York, PA
    Posts
    1,841
    Points
    14,477
    Level
    78
    Points: 14,477, Level: 78
    Level completed: 7%, Points required for next Level: 373
    Achievements:
    Social10000 Experience PointsO.G.

    Re: Third Gen Center Console Differences

    I don't get how it wasn't, I'd kill for one, especially after getting to the newer models that have it here in the US.

  14. #14
    SLi nOOb
    Join Date
    Feb 2014
    Posts
    145
    Points
    3,038
    Level
    33
    Points: 3,038, Level: 33
    Level completed: 92%, Points required for next Level: 12
    Achievements:
    1000 Experience PointsVeteran
    Any idea of what the part number would be?

  15. #15
    "FNG" Jacobpockros's Avatar
    Join Date
    Apr 2013
    Location
    San Diego, CA
    Posts
    40
    Points
    3,298
    Level
    35
    Points: 3,298, Level: 35
    Level completed: 66%, Points required for next Level: 52
    Achievements:
    1000 Experience PointsVeteran
    Quote Originally Posted by rkrenicki View Post
    There is an Armrest Extension that was sold in Japan for the BE/BH platform that should work, but they are exceedingly rare as it was not an overly popular option there.
    Is this the extension you’re talking about? Do you know if it extends longitudinally?



    2001 Subaru Legacy Limited Sedan 5spd
    Delta 1500 Cams/ DNA Motoring UEL Headers/ Magnaflow 14829 Catback/ Ganzflow and K&N Drop-in/ Perrin Crank Pulley/ Tein S-Tech Springs/ KYB Struts/ Paranoid Fabrications Rear Tophat Spacers/ Whiteline Front & Rear Sway Bars/ eBay Front Strut Bar/ Drag DR-31 Wheels/ Outback LL Bean Steering Wheel/ Yakima Roof Rack/ Putco Yellow Fog Bulbs/ 170,000+ Miles

  16. #16
    Administrator rkrenicki's Avatar
    Join Date
    Jun 2009
    Location
    Southeastern CT
    Posts
    2,818
    Points
    23,967
    Level
    94
    Points: 23,967, Level: 94
    Level completed: 62%, Points required for next Level: 383
    Achievements:
    10000 Experience PointsO.G.SocialOverdrive
    It does not, it is just a raised top.
    2020 WMA Ascent Limited
    1992 KS4 Sambar SDX S/C - JDM Kei Truck
    2017 BN9 Legacy 2.5i Premium Eyesight - Wife's car
    2013 GP7 Impreza Sport - Daughter's car
    Retired: 2010 SH9 Forester | 2004 BEE Outback | 1996 BG9 Outback | 1993 BJ6 Legacy | 1998 SF9 Forester

  17. #17
    SLi Lurker Sub-Goon's Avatar
    Join Date
    Feb 2013
    Location
    Oakland, CA
    Posts
    431
    Points
    2,599
    Level
    30
    Points: 2,599, Level: 30
    Level completed: 99%, Points required for next Level: 1
    Achievements:
    1 year registered1000 Experience Points
    Any chance of resurrecting the pics from the first few posts?

  18. #18
    Administrator rkrenicki's Avatar
    Join Date
    Jun 2009
    Location
    Southeastern CT
    Posts
    2,818
    Points
    23,967
    Level
    94
    Points: 23,967, Level: 94
    Level completed: 62%, Points required for next Level: 383
    Achievements:
    10000 Experience PointsO.G.SocialOverdrive
    I will have to dig around for them, but I am positive that I do still have them.
    2020 WMA Ascent Limited
    1992 KS4 Sambar SDX S/C - JDM Kei Truck
    2017 BN9 Legacy 2.5i Premium Eyesight - Wife's car
    2013 GP7 Impreza Sport - Daughter's car
    Retired: 2010 SH9 Forester | 2004 BEE Outback | 1996 BG9 Outback | 1993 BJ6 Legacy | 1998 SF9 Forester

  19. #19
    "FNG" Kamion's Avatar
    Join Date
    Aug 2016
    Location
    Slovenia
    Posts
    25
    Points
    708
    Level
    14
    Points: 708, Level: 14
    Level completed: 8%, Points required for next Level: 92
    Achievements:
    3 months registered500 Experience Points
    One cup holder:
    Name:  tn_Legacy_Interior.JPG
Views: 407
Size:  118.0 KB

    Two cup holders:
    Name:  DSC_1130_zps450ef16b.jpg
Views: 226
Size:  104.4 KB
    Name:  outback-vdc-2002e.jpg
Views: 249
Size:  60.8 KB

    EU version with hi and low range gearbox:
    Name:  9.jpg
Views: 247
Size:  114.9 KB
    Subaru Legacy GL EJ20 (BH, year 2002)

  20. #20
    Administrator rkrenicki's Avatar
    Join Date
    Jun 2009
    Location
    Southeastern CT
    Posts
    2,818
    Points
    23,967
    Level
    94
    Points: 23,967, Level: 94
    Level completed: 62%, Points required for next Level: 383
    Achievements:
    10000 Experience PointsO.G.SocialOverdrive
    Quote Originally Posted by Sub-Goon View Post
    Any chance of resurrecting the pics from the first few posts?
    I know this is an ancient request, but I have re-uploaded the original pictures.
    2020 WMA Ascent Limited
    1992 KS4 Sambar SDX S/C - JDM Kei Truck
    2017 BN9 Legacy 2.5i Premium Eyesight - Wife's car
    2013 GP7 Impreza Sport - Daughter's car
    Retired: 2010 SH9 Forester | 2004 BEE Outback | 1996 BG9 Outback | 1993 BJ6 Legacy | 1998 SF9 Forester

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •