Results 1 to 7 of 7

Thread: Bolt shoved in head!

  1. #1
    SLi Resident thenines''s Avatar
    Join Date
    Jan 2012
    Location
    central mass
    Posts
    728
    Points
    5,463
    Level
    47
    Points: 5,463, Level: 47
    Level completed: 57%, Points required for next Level: 87
    Achievements:
    O.G.5000 Experience Points

    Bolt shoved in head!

    the exhaust in my '99 needs to be replaced-easy-except the previous owner had some jacka** damage one of the studs and shove a bolt into its place-where do I go to get this problem taken care of?
    Legacys are like potato chips-You can't stop at just one!

  2. #2
    SLi Resident 86bratman's Avatar
    Join Date
    Jul 2013
    Location
    Tazewell VA
    Posts
    739
    Points
    4,313
    Level
    41
    Points: 4,313, Level: 41
    Level completed: 82%, Points required for next Level: 37
    Achievements:
    1000 Experience PointsOverdriveVeteran
    In no particular order, remove the bolt, go to the help section at advance auto or your preferred parts store. Buy a set of exhaust studs for a Nissan, not sure what the part number is or the thread pitch offhand. But I've used them a few different times with rusty studs on these cars.
    My 1997 Legacy L

    Fuelly

  3. #3
    SLi Resident thenines''s Avatar
    Join Date
    Jan 2012
    Location
    central mass
    Posts
    728
    Points
    5,463
    Level
    47
    Points: 5,463, Level: 47
    Level completed: 57%, Points required for next Level: 87
    Achievements:
    O.G.5000 Experience Points
    Problem is-I'm afraid it will snap off-and, I'll be damed if the head has to be removed-everyone who has looked at it just wants to run from it (and they know there way around with torches and mig welders)-should I find an exhaust shop that would tackle it?
    Legacys are like potato chips-You can't stop at just one!

  4. #4
    SLi Lurker LeggyxPower's Avatar
    Join Date
    Jan 2012
    Posts
    466
    Points
    7,220
    Level
    56
    Points: 7,220, Level: 56
    Level completed: 35%, Points required for next Level: 130
    Achievements:
    5000 Experience PointsO.G.
    When changing my Headers one of the studs stripped the threads on the block.. look up a heli coil.. i drilled and taped and inserted the new heli coil along with the new stud, and its good as new


  5. #5

    Join Date
    Apr 2016
    Posts
    8
    Points
    638
    Level
    12
    Points: 638, Level: 12
    Level completed: 76%, Points required for next Level: 12
    Achievements:
    3 months registered500 Experience Points
    oversized bolt

  6. #6
    SLi Lurker nepbug's Avatar
    Join Date
    Sep 2014
    Location
    Denver, CO
    Posts
    411
    Points
    4,977
    Level
    45
    Points: 4,977, Level: 45
    Level completed: 14%, Points required for next Level: 173
    Achievements:
    1000 Experience Points1 year registered
    Exh. Man. Studs - p/n 80091055

    Or you can get some equivalent Dorman or other brand ones at your local parts store.

    To help out with removal, For a week, try to spray some penetrating oil up there while it's still warm after a drive at least once a day. It should wick in there and help increase your odds of success.

  7. #7
    SLi Resident thenines''s Avatar
    Join Date
    Jan 2012
    Location
    central mass
    Posts
    728
    Points
    5,463
    Level
    47
    Points: 5,463, Level: 47
    Level completed: 57%, Points required for next Level: 87
    Achievements:
    O.G.5000 Experience Points
    I finally did get it out-two years ago! (really late on the update!)-the bolt was easy to get out-thought, one of the factory studs did stay in the head-the nut came off-usally the nut is rusted to the stud and they both come out.
    Legacys are like potato chips-You can't stop at just one!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •