I got a deal on one of those rediculous STi wings for the BH and figured I would share my experience in disassembly and installation of one.

So, idk how they get these off the doner cars. I'm guessing a cut off wheel or pure luck. Anyway the first step is to remove the screw and 8mm bolt on the under side of the wing.


Once you do that (Do not start prying!) they are double sided taped to the wing.
I got a sharp scraper knife to break the tape apart. The plastic seems to get very fragile over time.
Go at it like this very carefully.

Once you get it free you will see this.