'10 LGT Limited. JDM Conversion 335hp/412 InfrontAutomotive Build "s2baru"

[stu-nami]

It's been quite some time since I've been an active member on the site however I haven't left the legacy community since selling my 2002 L sedan four years ago. I moved on to a 2010 Legacy GT as a reward to myself and started a full build that progressed quite a bit. Some of you may have seen me at various shows. BigNorthWest meet (Portland/Seattle) or WCSS, RockyMtn Subaru Festival (Denver), Wicked Big Meet (Stafford,CT), Scoobapalooza (St.Louis) and even ventured my car to Subiefest (Fontana,CA) in recent years.
Pretty can say I love and breath the Legacy platform. Even owned a 91' SS that you see in my avatar for 2years until I recently sold within the last few weeks to help fund my next stage of my 5thgen. I'll try to refrain from photoboming the first post but I'll work in my build progress the best I can. Feel free to follow my Instagram @s2_baru if you already aren't. If you are thank you!
Confidence in motion!!! Glad to jump back into the site as somewhat of a 'reintroduction'

- - - Updated - - -

Reserve

- - - Updated - - -

Reserve

- - - Updated - - -

Reserve

- - - Updated - - -

Reserve

- - - Updated - - -

**"

[stu-nami]

ENGINE/EXHAUST
Outfront Closed deck 2.5L block rated ~650whp
Sublet Machine shop, block, resurface flywheel, fit rods, balance, polish crank
Sublet Nitrous Coating for pistons/skirts x4
King bearing Sets Mains + Rods
Manley, Valve Spring and retainer Kit
GSC, Viton 6mm Valve Stem Seal Set
Killer-B, Subaru Windage Tray
Subaru, Engine Gasket Set, 10-12 LGT
Clutchmasters, FX300, push type turbo
Cosmetic Head Gasket, Subaru EJ25, 100mm bore, .040" 2
ARP, Head Studs
JE Piston Set, STD 99.5mm
Manely Turbo Tuff Connecting Rods
GSC Stage 1 Cams, 08+ STi
Cosworth Subaru EJ Timing Guide
Manley....Extreme Duty 33mm exhaust Valves (+1mm)
Manley....Race Master Intake Valves, 37mm (+1mm)
Sublet Machine Shop, heads, fit new cams, radial valve cut, reset lash, install viton seals, oversize valves, blend bowls, performance springs. 70lbs seat 180lbs @ .420"
Oil pump, JDM STi 12mm
SubaruOil Cooler, 10+ LGT
Gates Performance timing belt kit

Supporting engine mods/exhaust
COBB ACCESSPORT
RACERX TMIC...thermal coated
RACERX charge pipe....matched with turbo xs 50-50 bpv
INVIDIA CATLESS DOWNPIPE..custom 3inch. mid split to 2.25
PERRIN WRX 08+ AXLE BACK MUFFLERS

Suspension/wheels
TEIN STREET BASIS Coilovers(old setup) ....HKS hypermaxIV on currently
KARTBOY FRONT/REAR ENDLINKS
WHITELINE FRONT 24MM SWAY BAR
WHITELINE REAR 22MM SWAY BAR
KARTBOY POSITIVE SHIFT KIT... KDT901
KARTBOY REAR DIFF FRONT MOUNT BUSHING ..KDT905
KARTBOY REAR DIFF IN MOUNT CRADLE BUSHING ...KDT903
KARTBOY REAR SHOCK ASORBER BUSHING...W0505
KARTBOY LOWER INNER FRONT CONTROL ARM BUSHING...W0506
KARTBOY ANTILIFT/CASTER CONTROL ARM INNER REAR BUSHING...KCA334
GROUP-N 5MT TRANS MOUNT
MEGAN RACING 08+ WRX REAR LOWER CONTROL ARMS
MEGAN RACING 08+ WRX TOE KIT

Wheel setup:
One off custom Forgestar F14 in sunset orange 19x9 +35 ordered from Moore peformance
Nitto Motivos 255/35r19 ...minor pull on front done by Xissix (nate)
Winter setup.....OZ SUPERTURISMO GT 18x8 +35 ...245/45 tires

COSMETIC;
JDM RevA-C front bumper & Hood ..11/15
13-14 Black appearance package headlights 11/15
JDM fogs
Prova raingaurds
Grillecraft grill
flat blacked out front headlights, broken 9/15
20tint,
Orange powder coated Hella horns
stock wheels painted gloss black,
led interior lights and turn signals/reverse lights
BaysonR JDM replica lip (colormatched)
Invasion Fabworks alternator shroud
Smoked vinyl rear taillights
Rally ARMOR FLAPS.

2010 Subaru Legacy GT Limited
Not many lgts for 5thgen were produced Got some preliminary numbers for 2010 Legacy's GTs from SOA. VERY surprised it looks like I'm 1/1411 or 1/279 graphite grey metallic and 1/199 in limited trim.

[/URL][URL=http://s991.photobucket.com/user/stu-nami/media/S2BARU/Screenshot_2015-04-23-19-59-31_zpsc2atckv0.png.html][IMG]

http://s991.beta.photobucket.com/use...56-12.mp4.html exhaust coldstartup
exhaust vid from LM meet
http://s991.beta.photobucket.com/use...08-18.mp4.html warmstartup with few revs

[stu-nami]

Some autoX action

Infront pulled her heart out 1/31/14 for the full engine build
[URL=http://s991.photobucket.com/user/stu-nami/media/STUbaru/20140817_144046_zpsoinaz2ts.jpg.html][

Posted up at some cars an coffee we do during the summer

[stu-nami]

8J9A1205-Edit-2 by Bart Cepek, on Flickr


StuLGT1 by Shawn Rankin, on Flickr
DSC_8312 by Jason Brown, on Flickr
Some professional photos I'll share from a few friends

[stu-nami]

For those that didn't know I traveled all the way to Wicked Big Meet in Stafford,Connecticut. Doesn't seem like a big deal for the award being for "furthest driven" but it speak volumes for the support I had from everyone while I didn't have my car. Subaru community is unreal with the comradary amongst all the enthusiasts. Had BIG support from the legacy brethren out of the east coast. Gives me a great feeling to log just under 6000miles. An experience I'll never forget. Still more shows and plans though!!!
#confidenceinmotion

[foohfooh]

Wow. Welcome back. Beautiful car. Looking forward to following the progression

[stu-nami]

How she sits as of now. Currently working on a FMIC, rotated intake manifold, parallel fuel system, to support the planned 30trim or higher series turbo. Efr6758/7064 range with a custom header is the long-term goal of 425+hp/500+ wtq

[98legwag]

Such an amazing car.

[stu-nami]

Little bit of a throwback when I had my old BE for a few shorts weeks before selling it. Loved that car!!!
Thank you for the compliments!!

[stu-nami]

Been a little bit...few updates to make with the change of the new year and moving forward with plans.
Few items Santa's little helpers got for me and bday gifts from good friends.
Perrin shift stop
Perrin steering dampener delete
Perrin brass shift bushing
Single pod for driver side pillar
Dual pod for steering column
JDM revA-C 'sport' mesh grill
Outfrontmotorsports fuel rails
Outfrontmotorsports Long tube intake manifold
Boomba short throw
FMIC will be underway next month along with rotated manifold, parallel fueling, pump, & injectors.

[stu-nami]

Came across a set of brembos via nasioc. Too good of a buy to pass on although I didn't plan to buy a set until next summer I decided to jump on them. Unsure of what color I'll do, purple seems to come to mind first

[stu-nami]

I've always wanted to switch over to the STI spoked wheels so came across a set locally with virtually new Dunlop Graspic Ds-3 snow tires for an unbelievable deal so I snatched them up. Second thing is the OZ SUPERTURISMOs 18x8 +35 that were a weird primered color from a WRC show car. But i decided to change the color so had them stripped and then powdercoated last week... . New color for them is called Bengal Silver. Anyhow, cheers!!

[Reason]

Impressive mod list, great work!

[Tylerhartman]

holy.. This is pure sex.
Sub'd for more of this good stuff!

[Dead91silvia]

You and a couple 4th gen GT's past my crew on our way in to WCSS this summer. Clear car for sure.

[stu-nami]

Thanks fellas. Plans with all this seems to happen in big chunks at a time. Right now she's sitting on jackstands until I get rubber on the OZs or get adapters for the sti wheels. Snowfall has been pretty weak in the valley so not sure which set to bolt on.
A 20mm spacer wshould make the sti one pretty flush, found a company back east to make a set. Otherwise it seems 15 and 25mm adapters that ISC and others make most commonly.

[stu-nami]

My fault for the the delayed update. OZs look great, just need to readjust my coils now is all. Going to be changing a few things do some unforseen issues so build will most likely be changing quite a bit. Need to get my engine out to clean up a few things then take it from there.