I put in a pioneer headunit the other week and since doing so, I have noticed that my rear 6x9 "sub" speaker has stopped working work and the reception of the radio is horrible. I pulled it out and am trying to rewire it but im having some issues with a few of them.
1st issue: the rear speaker! In the schematic for the non mac radio, there is a sub but it has a completely different 8 wire connector (i64) seperate from the bigger one (i26) and the connector that you get from crutchfield. So where would i wire in the sub to make it work? On the i26 connector coming from the car, there is a Black/White wire (#7 position) that doesnt have a wire on the Crutchfield connector that I cant find on the schematic.
2nd issue: In the schematic, i cant find anything about a powered antenna, which is the only reason I can think of why with the new headunit i cant get good reception. On the Crutchfield adapater there is a blue wire that says power antenna and I am not sure where that goes.
anyone out there with some insight...i would greatly appreciate some feedback. Thanks