LosMan's 97 Legacy GT-B

[LosMan603]

I have owned my GT-B for about 3 weeks, and plan to try and keep this as close to OEM as possible. I have made a few very small modifications to the car thus far, most of which I have posted about in the new member forum. I'll begin to use this thread as a journal to record everything about the car from maintenance to modifications.

Also, I'll post as many delicious pictures of the gtb as possible

I'll do my best to update this thread any time I have new information, mods or maintenance. Hopefully this will grow and be a great place to record info about this awesome twin turbo platform.


Engine:
Valve Cover Gaskets @ 85k KM's
Fumoto Drain Valve @ 88k KM's
Laile oil filler cap @ 95k KM's
Timing Belt Kit @ 95k KM's
Water Pump & Thermostat @ 95k KM's
Accessory Belts, hoses, pcv @ 95k KM's



Exhaust
Trust Stainless muffler & 3" cat back pipe




Maintenance
Oil & Filter change @ 85k KM's (Tokyo Roki filter)
HKS Super Air Filter @ 95k KM's
650 CCA Battery @ 85k KM's
Clutch fluid flush @ 87k KM's
Improved existing BOV install (made a bracket & shortened hose)
OEM Air filter @ 87k KM's (existing HKS filter was toast)
Coolant drain/flush @ 87k KM's (reading approx. 9 ph.)
Blackstone Labs Oil Analysis @ 88k KM's (no foreign materials detected, excellent results )
Brake fluid flush @ 92k KM's
Front & Rear differential fluid @ 96k KM's



Exterior
JDM Zenki Grille (slightly too small for my Kouki bumper :/)
OEM Bug Deflector
OEM Rain Guards
Full tint on all windows
Upcoming Stuff: Repair driver side skirt



Interior
Bride Door Cards
Bride Shift Boot
ProDrive Floor Mats
GrimmSpeed SS weighted shift knob
Boost Gauge @ 88k KM's
Full LED interior lighting
Sony touchscreen radio & 400W amp
JL Audio Speakers
OEM Cargo Cover
Upcoming Stuff:Oil pressure gauge, Air / Fuel ratio gauge



Tires / Suspension / Brakes
Falken Ziex 215/45/R17 @ 85k KM's
Falken RT660 225/45/R17 @ 95k KM's
Laile strut bar
Front Pads, Rotors @ 92k KM's
Front passenger side caliper & hose @ 92k KM's
Rear Pads/Rotors @ 95k KM's
Endless Stainless Brake Hoses
Cusco sway bars
Whiteline sway bar links
Cusco Front & rear power braces
HKS Hipermax S Coilovers
Beatrush wagon bars

[LosMan603]

I found an OEM cargo cover on Craigslist last week, just cleaned it up and it popped it in the Legacy. Also fitted a small fire extinguisher to the cargo area (I have lost cars to fire before :/)

[LosMan603]

While I was walking aimlessly through Harbor Freight, I noticed a boost gauge for sale... only $18? Can this be real? Only one way to find out.

I'm happy to report, this crappy little boost gauge was a breeze to install. I plumbed it into the #11 vacuum line to the BboD, then wired into the accessory circuit (same as my turbo timer). I then ran the hose through the driver side firewall, by removing a small grommet (ill eventually create a small hole in the grommet to run more stuff through, then silicone it closed.) I decided to run everything up through the driver side defrost vent by the door. Overall its a pretty clean install.

The gauge seems to be accurate too, registering about 13 psi when I do a good pull getting onto the highway. I'll keep it there for now while I try to figure out an oil pressure gauge, and then some proper way to mount them to the A pillar. I have seen some threads about DIY A pillar gauge pods, I make try to find a pillar from a scrap yard and try it out.

[Gman00197]

I love your car and cant wait to see what you do with it. I also have a white gtb '96 model that i plan on doing a full overhaul on when i get moved back to the states from japan in a few months. Did you happen to do the turbo timer install yourself? i am trying to find one but it seems to be hard to find one that is setup to work with the gtb sequential turbo setup.

[LosMan603]

Thanks, looking forward to seeing and hearing more about your gtb.

I did not install the turbo timer on this car, however, I have installed them on several others in the past (mostly Nissan applications). As far as I remember, turbo timers are vehicle agnostic, meaning they can be installed on any car.

The units I had installed only required that I wired them into the ignition, and ground them into the parking brake. That way, when the parking brake is applied the turbo timer has a complete circuit. Anyways, all its doing is bypassing the ignition switch, so the ecu still thinks the ignition is on. Once the timer runs out, it switches back so the car will turn off.

Long way of saying, any turbo timer should work fine on your gtb.

You can find the one I have on eBay for around $70, its an old Pivot full auto turbo timer.

[LosMan603]

Today was a beautiful day to be out in the garage, so I made a very conscious decision to avoid my real work duties and focus on the dusty old hood liner and 25 years of dirt built up around it. One of the main sore spots (in my eyes) has been how tired and grimy the hood was. I figured, what the hell I might as well just touch it up





In my mind it seemed the easiest way to properly do this would be to remove the hood from the bg5, so that's what I did. (ask a friend for help with this kids, putting it back on alone is tricky). I removed the bug guard, washer fittings and all the trim (only broke 1 plastic fastener!! I sanded everything with 400 grit sand paper, cleaned with mineral spirits.





Once it was dried off, I walked it outside to my makeshift paint booth / wooden board thing. I laid a couple coats of self etching primer, then went to bed. At this point I think I had spent about 2.5 hours total, most of that sanding.





In the AM I sanded the primer with 800, then laid 1 more light coat. After that dried, I used a can of 51E Aspen White that a local parts shop mixed. $28 for a 13oz can, no idea how that compares to other places but please share if you know!





Then came the "hard" part (warning this is also the part where you may hate what I have done)

I had previously decided I wanted to cover only the thin parts of the hood in fiberglass tape, and not use another fiberglass mat. This is just more of a preference thing for me, I don't think there is any functional benefit. In fact, it is probably the opposite... but I think it looks cool.

Anyway, if I was going to use a fiberglass tape obviously I needed to use gold foil... so yeah, this is what we ended up with:





I took apart the cowl and rubber under the hood scoop and cleaned / repainted as well. Instead of the black paint I went 2 tone with silver & black. a little more bling lol.

Overall, I am very happy with it. I think the gold and white are really pretty striking, and better than the dusty old look

Feel free to pile on, I would love to hear others opinions on this!!

[LosMan603]

I finally upgraded the audio, since the existing radio did not pick up US frequencies. I had no idea about this, but JDM head units only pick up frequencies up to 89.9.

I had tried installing a band expander, which was supposed to increase the range to 107.9 but I had no luck. It was easy to install but had zero effect. Now a Sony touch screen head unit and in-line 400W amplifier are installed. I also added JL speakers, and sound proofed the doors. It sounds amazing!

[LosMan603]

A couple of months ago, I had ordered a Laile strut bar and oil filler cap in a moment of weakness The parts finally arrived and I quickly installed them, since I don't put the BG5 hard into the corners I haven't noticed any difference in handling but the golden powder coating looks great, and maybe adds 1hp







I also ordered larger Cusco front & rear sway bars. I will be bolting them on as soon as I pick out an upgrade for the end links as well. Stay tuned for more delicious pictures of that install.

[LosMan603]

The front right brake caliper was not releasing pressure, so I decided to replace the caliper and hose. Since I needed to do this quickly, I just ordered parts from my local Napa and they worked great. I also flushed the brake fluid and that definitely improved the pedal feel.

Longer term, I would like to install the 4/2 pot sti calipers and Endless rotors with Project Mu pads. For now though, the brakes are back to functioning 100%

[LosMan603]

The look of a heavily tinted wagon has always looked good to me, so I dropped the car at a local tune shop and had the GTB windows blacked out. What a difference this made to the appearance, I love it!

[Alucard]

Longer term, I would like to install the 4/2 pot sti calipers and Endless rotors with Project Mu pads. For now though, the brakes are back to functioning 100%

.

Once you do the 4pot/2pot conversion, that wagon will transform into the animal it should be around the curves. My '99 LGT wagon eats the corners endlessly with the 4pot/2pot setup. If ever you are in CT and need assistance, I will come through. I've helped a friend and we worked HARD to get his Tommy Kaira M20tb up and running smoothly. I'd like to think I'd gotten really good at the twin turbo stuff, especially with Reuben's help.

[Muse]

This is a properly gorgeous car. Maybe one of the best looking Subarus, out of the box.

.

Once you do the 4pot/2pot conversion, that wagon will transform into the animal it should be around the curves.

Can confirm the effectiveness of the 4/2 pots. Of all the things I love about my car, they're probably the biggest thing I love.

[LosMan603]

It has been a long time since I updated this thread, but I have been very busy with the Legacy I finally saved up enough to get a lift installed in my garage, so I went into full maintenance mode.

I ordered on OEM timing belt kit, water pump, thermostat, oil pump and coolant hoses. Using the Company 23 cam lock makes the T belt job pretty easy. This is the 3rd Subaru timing belt job I have replaced & thankfully all have been successful.

Here's a pic while everything was being taken apart.

[LosMan603]

During my maintenance extravaganza, I also wanted to remove the intercooler and replace the PCV assembly. The OEM hoses were rock hard and not sealing anymore at all.

I also replaced the clutch slave cylinder hose with an upgraded Cusco braided unit. The OEM are prone to failure so it was sort of preventative, but also just cool since it is Cusco

[LosMan603]

While I was removing the PCV hoses, I accidentally cracked the plastic air intake fitting. This is probably the worst possible component to damage on these cars.

The air intake tube on the twin turbo EJ a HUGE PAIN IN THE ASS to access (with the engine in the car) It is almost impossible to remove without also removing the intake manifold. They are also extremely hard to source, since Subaru stopped production of this part several years ago. I did find a couple available in the Philippines but have no way to verify if the websites were legit.

After several hours of tinkering and careful discussion with Reuben, I decided to thoroughly clean the area around the fitting and seal the cracked fitting. Here is a picture of the intake tube that i found online. The red circled area in what I cracked.



After lots of cleaning I managed to slide a small heat shrink tube over the cracked fitting. The heat shrink has a marine grade sealant on the inside which melts and becomes completely air tight. So far the repair has help up quite well.

[LosMan603]

I also spent a fair amount of time replacing several old coolant hoses & fuel lines. Lots of other vacuum lines were super dry so I replaced those here and there as well.

I also tidied up some of the engine bay, and decided to sand and repaint the turbo heat shields. Don't tell my wife I degreased them in our kitchen sink.



I also sanded and painted the intercooler & EGR manifold to try & match some of the gold Beatrush parts I have been adding on. I used a rattle can of high temp gold paint and the overall results look ok... if you are into gold

[LosMan603]

Once the timing belt and other maintenance was sorted, I decided to install some Cusco sway bars, Whiteline end links, & Cusco front & rear power braces:

[LosMan603]

More recently I have replaced the JDM yellow Bilsteins with a new set of HKS Hipermax coil overs. These ride incredibly smooth on the street, but are definitely stiffer. Currently I have them set 2 clicks below the stiffest setting on all 4 wheels and overall I lowered the car about 1.25" all around:



Since I have been using the car in Autocross this summer, I also added some 200 treadwear Falken RT660 on a new set of gold T6R Enkei's. I think it looks great, & the ride height is spot on for me. I did have to roll the inner fenders for the Enkei's to fit in the rear since I an running 225/45 tires (slightly wider than stock). A cheap Amazon fender rolling tool and my Harbor Freight heat gun made short work of that task.





While I was in there, I replaced the OEM brake hoses with a new set of Endless braided lines. They are coated in PCV which is supposed to help prevent corrosion (but this car will never leave my garage in bad weather hahaha)

[LosMan603]

I just popped in a new air filter, how cool is this box!

[BD5_Legacy_RSb]

Keep it going!

[LosMan603]

My wife finally made it to one of my Autocross events, here are a few pics of us pulling up to the start line.

It has been so much fun competing with the BG5 this year. I have never participated in any serious motorsports before, so this season was such an eye opener. Being able to push the BG5 on the track has been a great learning experience.

[LosMan603]

There are 2 or 3 more track days for me this year, then I'll be parking the BG5 and getting into some maintenance. Looking for any and all advice here.

I am planning to replace the ball joints & control arm bushings up front, as well as the steering rack bushings (currently very swollen due to a leaky rack). I am also planning to replace the engine & trans mounts with some Subaru Group N units.

The rear will see new trailing arms and lateral links.

Question: Which manufacturers could you recommend? I have heard great stuff about the Cusco arms/links for the rear, but the price tag is high. I have splurged on some other Cusco bits in the past, but i want to stick to more of a budget this winter

P.S. since this is not a daily driver, I dont care about comfort or noise.

[Holeshot]

Car looks great. Awesome inspiration I just bought my son a white 97 BD5 twin turbo and I was texting him all the pictures of your car haha. Love the wheels too.

Also what radiator cover is that? I checked the beatrush website and I don't see it?

[LosMan603]

Car looks great. Awesome inspiration I just bought my son a white 97 BD5 twin turbo and I was texting him all the pictures of your car haha. Love the wheels too.

Also what radiator cover is that? I checked the beatrush website and I don't see it?

Thanks! I got that Radiator cover from Japan. I think you can order still them on rhdjapan.com