I have found the parameters in Romraider - they only visible if you set Romraider to use SSM protocol, not OBDII. If it gets data correctly, I did not see any changes from the moment of a cold start till the engine is warmed up:
I have found the parameters in Romraider - they only visible if you set Romraider to use SSM protocol, not OBDII. If it gets data correctly, I did not see any changes from the moment of a cold start till the engine is warmed up:
hmm, that's strange. can you post a video of the problem?Originally Posted by ilib11
I have found the parameters in Romraider - they only visible if you set Romraider to use SSM protocol, not OBDII. If it gets data correctly, I did not see any changes from the moment of a cold start till the engine is warmed up:
No, no ,no I'm not insulting you, I'm describing you!
I do not have a video at the moment, will do soon. This picture though illustrates the problem - on idle, at the moment AC is ON, RPM drops and the engine seriously vibrates and runs like it is choked. Then RPM is increased and the engine recovers. Next time AC is ON (or actually any other extra load added such as the auto transmission put on Reverse) the situation repeats itself.
The full set of logs is in this post http://forum.liberty.asn.au/viewtopi...=36648#p449755 so everyone please feel free to have a look and make your suggestions. I can do more logs with romraider as required - just let me know what would you like to see.
Posting Permissions
Reply With Quote