PDA

View Full Version : 92 Legacy Turbo into 93 Legacy 2.2



Legacy89
06-06-2013, 07:10 AM
So what exactly will i need to install from the parts i picked up?

The main differences between the models:
Turbo(Obviously)
SOHC to DOHC
AC
Cruisecontrol
4AT to 5MT

I picked the donorcar clean except for some interior pieces and fueltank. But what can be re-used of the original 2.2 bits.
Can i use the original harness or do i have to swap the entire thing with the turbo one along with the ECU?
Are Subaru's usually pre-wired for AC?
How will the Cruisecontrol work with the swap? It was original on the EJ22/4AT in the car.

Rust2Runner
06-06-2013, 02:04 PM
Are inspection laws more lenient there? That'd rarely pass inspection here in california, with the older than chassis motor. I'd hate to do all that work, then get de-reg'd by a sharpeyed smog man.

Legacy89
06-06-2013, 04:57 PM
They don't care about that, as long as the engine is from the same chassis type or model it's fine.
And i don't care because it's Turbo, has about 30000km less on the clock and is a more efficient engine.