Legacy BH rear strut spacer template

[Kamion]

Hey.

Does anybody have a rear strut lifting spacer template for Legacy BH?

I was searching around, but because the photobucket screwed every forum up I could not find any....

Thank you!
Greetings from Slovenia!

[Huffer]

Here's an example:
https://www.paranoidfabrications.com/collections/subaru-legacy/products/00-15-rear-subaru-legacy-lift-spacers

[Kamion]

Thank you, I know how back strut spacers look.

I am searching for template with dimensions of holes.... I dont want to disasemble the car 2 times only to take measurements once...

I found these posts, but there is no images because photobucket is screwed...

http://www.subaruoutback.org/forums/99-do-yourself-illustrated-guides/31520-diy-strut-spacer-lift-templates-8.html
http://www.scoobytruck.com/bb/viewtopic.php?t=2506

[Huffer]

You could just go buy a strut top from an auto parts store, make a template, then return it un-used. Or better, just make the template while in the store.

[Kamion]

Yes, the problem is that I am not from USA but from small country in Europe -> Slovenia, and here I can not find spacers for Subarus nowhere (Because Subarus are prety rare). Only maybe in Russia but the shipping is more than the spacer itself..

[Huffer]

This thread might help:
http://www.subaruoutback.org/forums/99-do-yourself-illustrated-guides/31520-diy-strut-spacer-lift-templates-3.html

[dodik]

i made mine on the spot, used hdpe plastic, basically took off the strut, traced the mount and cut it out, took maybe an hour to cut first one and 30 minutes for the second one, then assembled alltogether with spacers.

[Kamion]

So I had to make my own templates...
2481