It is a North American D-type shootout! Very few D-type 3rd gens exist on this side of the Pacific, and it's now between them to battle for the title of March ROTM.

Yamazaki's '02 H6 VDC "Blitzen6"
Link to MR1



Quote Originally Posted by YamazakiSubaru
Interior:
Dark purple/Black leather front seats (option on RSK and all Blitzen) *installed*
Dark purple/Black leather rear seats (option on RSK and all Blitzen) *installed*
Dark purple/Black leather door panels (option on RSK and all Blitzen) *installed*
Dark purple leather LIBERAL center console and handbrake cover (aftermarket) *installed*
Aluminum Legacy door sills w/STI decals (from Subaru catalogue and dealer option) *installed*
Center armrest console w/closable cupholder (on all Legacy) *partially installed*
GT30 "BFM" illuminated gauge set (same as RS30, Blitzen6, and Lancaster6) *installed*
Woodgrain A/T shift knob (aftermarket) *installed*
Woodgrain/leather steering wheel w/ cruise control (on most Lancaster) *installed*
S401 hazard switch *installed*
Autobacs woodgrain look 270mm wide rear-view mirror *installed*
RS rear floormats (same as RSK) *installed*
STi A/T pedal set (from Subaru catalogue) *installed*
White LED map lights *installed*
White LED cabin light *installed*
Pink LED door lights *installed*
Pink LED strip on inside of door *installed*
Silver painted gauge cluster surround and vents *installed*
'00~'01 Woodgrain HVAC surround w/cupholder *installed*
Dark purple dyed carpet *installed*
SMK Fabrication 'SLi' dead pedal *installed*
12v Accessories outlet next to parking brake *installed*
Alpine STE-160C rear speakers *installed*
Sony XS-GS1720S front speakers/tweeters *partially installed*
A bunch of Dynamat and some Dynaliner *installed*

Exterior:
Darkened glass rear windshield (option on all B4) *installed*
Rear wiper assy (on all B4)
'02 Blitzen HID headlights w/leveler switch and wiring ('02-'03 Blitzen) *installed*
B4 'LEGACY' taillights (on all B4 except S401 and '03 Blitzen) *installed*
'02 Blitzen grille ('02-'03 Blitzen) *installed*
D model aluminum hood w/out scoop (on all D type non-turbo models) *installed*
'03 Blitzen front bumper w/CIBIE foglights ('02-'03 Blitzen) *installed*
GT30 front bumper beam (on all Legacy) *installed*
Moonroof wind deflector (from Subaru catalogue)
Blitzen6 rear badges ("Blitzen6", "SUBARU", "6" w/pistons) *partially installed*
STI various stickers/decals (from Subaru catalogue)
STI tire valve caps (black)
'01 Blitzen trunk w/spoiler (on '00-'01 Blitzen B4) *installed*
Blitzen wheels (on all pre-'05 Blitzen) *installed*
Right/left fenders w/clear blinkers (all Legacy fenders and dealer option blinkers) *installed*
'03 Blitzen rear bumper (all '02-'03 Blitzen sedans and S401) *installed*
'03 Blitzen side skirts ('02-'03 Blitzen) *installed*
All four doors (on all Legacy) *dropped from list*
Legacy rainguards (aftermarket, not OEM Subaru)
STi Genome exhaust (from Subaru catalogue) *installed*
Door side trim removed and filled in *installed*
35% tint front windows *installed*
30% tint rear windows *installed*

Engine bay:
2 motor washer reservior (on all Legacy) *installed*
WJR type 02 S horns 115dB (aftermarket) *installed*
RS30 engine cover (same as GT30, Blitzen6, and Lancaster6) *installed*
STI Genome strut tower bar (from Subaru catalogue) *installed*
DC Power Engineering 180 AMP high output alternator *installed*

Braking/Suspension:
Bilstein suspension (on RSK, GT-B, RS30, GT30, and all Blitzen models) *removed*
STI pink springs (from Subaru catalogue) *removed*
FHI 4pot calipers w/rotors and pads (Blitzen6, '03 Blitzen) *installed*
Nissan 2pot calipers w/pads (from BNR32) *installed*
TechnaFit SS brake lines (aftermarket) *installed*
Aluminum control arms (on all turbo and 6-cylinder models) *installed*
22mm Whiteline adjustable rear sway bar *installed*
ZeroFourR rear stabilinks (aftermarket) *installed*
D type Legacy rear suspension brace (on all D type Legacy)
Cusco underbody brace for non-turbo Legacy (aftermarket) *dropped from list*
Whiteline KLC 139 front endlinks (aftermarket) *installed*
Kartboy rear 2pot adapter brackets *installed*

rkrenicki's '04 US "RS30"
Link to MR1



Quote Originally Posted by rkrenicki
Exterior
Sunroof Deflector Delete
JDM D type HID Headlights converted to flat beam pattern
JDM D type Aluminium Non-Turbo Hood
JDM D type RS/RSK/RS30 Sedan style bumper
JDM D type Small-cell Honeycomb B4 RSK grill
JDM Smoked Legacy tail lights and finisher panel
JDM tinted rear door windows
NMO Antenna mount on trunk lid
Hella Supertone Horns
Subaru Crosstrek XV 17x7 wheels and Sumitomo HTR A/S P01 225/55R17 tires
Removed USDM trunk and door badges
JDM RS30 and "Piston 6" badges
USDM 4th Gen Legacy "Subaru" badge

Interior
JDM BFM Gauge Cluster (85015AE090 version)
Onstar Delete
Scangauge II
JDM S401 Red Hazard switch
CDM Auto HVAC controls with Metric temperatures

Audio/Video
Alpine CDA-9886 with Red LED mod
Alpine MDA-5051 In-dash Minidisc Changer
Alpine KCE-350BT Ai-Net Bluetooth module
Sirius SC-C1 Satellite Radio
Alpine PXA-H100 Imprint System
Infinity Basslink II (Partially Installed)

Engine/Transmission
B&M Supercooler 70255 for Transmission cooling
KnuKonceptz 4GA CCA Grounding upgrade

Suspension
Whiteline BSF14X 22mm Front Sway Bar (Not yet installed)
Whiteline BSR12XZ 20mm Adjustable Rear Sway Bar (Not yet installed)
KYB Excel-G/GR-2 Shocks #341276 for Rear (Not yet installed)
KYB SM5214 Rear Shock Mounts (Not yet installed)

Brakes
Currently stock

Exhaust
Currently stock

Future Plans
Install Infinity Basslink
Install Yaesu FT-7900 two-way radio
JDM tinted rear windshield (Found, in process of ordering)
JDM rear windshield wiper (Not yet installed)
JDM OEM Rain Visors (Ordered, not yet here)

Bataru's '00 BE GT "Batmobile"
Link to MR1



Quote Originally Posted by Bataru
Engine: JDM MY03' WRX STi EJ207 (EJ207DR5CR)
  1. - JDM MY03' STi stock EJ207 w/ AVCS
    - JDM MY03' STi VF-37 twin-scroll (No restrictor pill)
    - JDM MY03' STi stock twin-scroll manifold / up-pipe
    - Cruise control delete
    - USDM MY04 WRX Drive-by-cable throttle
    - Mishimoto Aluminium Radiator
    - Mishimoto Aluminium Radiator shroud & dual electric slim fans
    - Modified stock radiator hoses
    - GDB STi Genome catback (modified axle back to fit BE)
    - HKS intake + maf plate
    - JDM MY03' STi Top Mount Intercooler (TMIC)
    - JDM MY03' STi bypass / recirculation valve
    - JDM MY03' STi OEM downpipe (with cats)
    ---- Catless downpipe w/ AEM EUGO Wideband (downpipe on-order)
    - SLi Battery Tiedown


[list=2:bkdnb4nm]Maintenance items:
- oil seperator plate
- Rear Main Seal
- Gates Racing Kevlar Timing Belt
- Gates OE idler pulleys and tensioner
- OEM water pump
- OEM t-stat[/list:bkdnb4nm]

Fluids:
- Motul 75w90 synthetic oil
- Subaru Super Coolant (Blue)

--------------------------------------------------------------------
Electronics & Tuning:
[list=3:bkdnb4nm]
- JDM MY02 STi ECU "P/N = 22611AH190"
----- Swap was completed with a JDM MY03 STi ECU "P/N = 22611AH580"
----- however unlocking the ECU via open source proved to be a challenge.
----- *hansvonaxion* came through and shipped me the MY02 ECU! THANKS!
- AEM Tru-Boost Boost Controller
- AEM Tru-Boost Gauge
- Neetronics PDC-01 DCCD Controller
----- http://scoobyluke.com/scoob/scoob_dccd/ ... 20V108.pdf
- AEM EUGO Digital Wideband A/F guage & probe
--- Probe welded to catless downpipe
- USDM BE Cluster. No issues. Redline goes past the Digital Clock :-o
- A/C Still Works
--------------------
- Harness Merger:
--- Completed by http://www.sevenautomotive.ca
--- Merged JDM MY03 STi engine harness to 00' BE Body Harness
--- Body harness left in the car
--- Engine harness tapped into approx. 30 wires.
--- BE stock harness retained and tucked away
--- BE ECU plugs retained
--- ECU kick plate raised with spacers to allow JDM ECU + Harness & Stock BE Harness to fit
--------------------
- Tuning:
--- Tuned by Neetronics @ Oakville, Ontario - Canada
--- Petro/Sunoco Ultra 94 Octane
--- PSi 18.5
--- 259whp & 266wtq[/list:bkdnb4nm]

--------------------------------------------------------------------

Drivetrain: JDM MY03' STi 6MT 3.90FD
[list=4:bkdnb4nm]
- JDM MY03' STi 6MT
- JDM STi Titanium Shift knob (ball style)
- Exedy 6MT Stage 1 Clutch
- Exedy lightend flywheel
- Hybrid rear axles .. BH outers merged to JDM MY03' STi
----- SuberDave sent me a set of 21-splin races to create my hybrid axle - $175 shipped.
----- http://wordpress.suberdave.com/?page_id=278
- JDM STi MY03' STi R180 3.90
---- Installed R160 yoke/flange onto R180 to support the 4EAT driveshaft
- 97' BD 4EAT driveshaft
- Group N 6MT mounts
- Group A Pitch Stop
- Kartboy rear shifter stay bushings[/list:bkdnb4nm]

Fluids:
- Motul 8100 X-cess 5w40(6MT)
- Subaru 90LS LSD Oil (R180)
- AC Delco limited slip differential additive

--------------------------------------------------------------------

Wheels:
[list=5:bkdnb4nm]
- 5Zigen - Dual - 6 spokes - Winter - Hankook iPike W409 - 215/50/17R
- EIBACH Hubcentric Wheel Spacers 10MM all the way around
- Volk VR G2 or TE37's...Suggestions for summers are welcome... unknown size or tire... $$$$$ [/list:bkdnb4nm]

--------------------------------------------------------------------

Brakes:
[list=6:bkdnb4nm]
- Techna-Fit Stainless Steel brake lines
- JDM MY03' STi - Brembo 4-pot fronts
- JDM MY03' STi - Brembo 2-pot rears
- Rear 2-Pot Caliper Adapters (fastwrx.com)
----- chop/drill/snip the factory dust/splash shields
----- the rear spindle ground down to make room for the caliper bolts
- Custom front rotors (DBA pattern replica)
- DBA 4000 Series STi Adapter Rear Rotor
- Hawk pads f/r
- Painted calipers (engine grey) w/ custom bat symbol sticker
- Motul DOT 5.1 High Performance Brake Fluid[/list:bkdnb4nm]

--------------------------------------------------------------------

Fuel System:
[list=7:bkdnb4nm]
- Walbro 255 lph
- Petro/Sunoco 94 Octane[/list:bkdnb4nm]

--------------------------------------------------------------------

Chassis/Suspension: BE9
[list=8:bkdnb4nm]

Front End:
- Group N engine mounts
- JDM MY03' STi x-member
- USDM MY04' STi steering rack (Brand New)
- JDM MY03' STi Power Steering Pump
- Modified BE non-turbo power steering lines (oxy/acet torched and re-bent)
- USDM MY04 STi merged to BE 01 steering u-joint
----- pressed out the u-joint and used 75% BE u-joint
----- Had to retain the BE dampner in order to fit the spline count
- JDM MY03' STi front Aluminium control arms
--------------------------
Differential Support:
-stock
--------------------------[
Rear End:
- Cusco Rear subframe lower brace
- Whiteline 22mm Adjustable RSB
- Solid Endlinks[/list:bkdnb4nm]

--------------------------------------------------------------------

Interior:
[list=9:bkdnb4nm]
- Optima Red Top
- GT leather package
- Ugly fake-woodgrain accents (going to paint when I have a chance)
- Viper 2-way pager Alarm + Remote Starter
-[/list:bkdnb4nm]

--------------------------------------------------------------------

Exterior:
[list=10:bkdnb4nm]
- JDM RSK HID + DTRL Delete (30amp fused)
- JDM B4 Taillights (corners + center)
- OE - TYC Fog Lights
- Custom B4 Legacy Carbon Fiber JDM hood w/ scoop (CF-Technologies)
- B4 grille (grey L7 logo)
- Custom grille (batman symbol)
- stock GT skirts
- Integra Type-R front lip (ABS)--Broken x2-- I Need Something Smaller-- Deleted For Now
- Debadged except for the "Legacy" which has been resprayed in Universal Black (Blackish-gunmetal)
- Hella Supertones!
- Tint = 17 non-metallic all the way around.
- AVS 2-piece BE rain guards.
- Wiper Arm Sprayers taken from a 97' Park Avenue (90's GM fixed wiper nozels)
- Rally Armor (black with grey lettering)[/list:bkdnb4nm]

--------------------------------------------------------------------

Audio:
[list=11:bkdnb4nm]
-EJ207 Turbo Boxer rumble... sounds very very very very very nice.
-OEM tweeters
-OEM 6-disc changer (black)[/list:bkdnb4nm]

--------------------------------------------------------------------
Future:
- Catless Downpipe
- Spec B R180 cradle