What have you done to your car today?

[Huffer]

https://sl-i.net/FORUM/images/imported/2011/11/1113111301b-1.jpg

Reposted for friggin' hotness mate!!!

[Huffer]

I threw my fall season wheels and tires in the car... time to get them mounted, balanced and installed. Probably alignment time too.

[drft204]

picked up a gutted stock sti axle back

http://distilleryimage3.instagram.com/424a39ae101111e1abb01231381b65e3_7.jpg

[superu]

:twisted: A little clearance bragging video :twisted:
50 and 60 MPH!!

http://youtu.be/cVk2YLsqDMM

[httrdd]

You are freaking nuts going over that block at that speed! Nicely done though.

[prodriver1]

:twisted: A little clearance bragging video :twisted:

http://youtu.be/cVk2YLsqDMM
hell yes!!!

[Perdue]

Figured out I have a power steering leak...gotta track down where, but I'm betting it is the pump, and that its gonna be expensive. :-(

[bulldozer24]

check the where the reservoir meets the pump there is an o-ring that can go bad also the bolt that connects the two has a washer with a rubber ring on it. that's where mine was leaking, both were only a few bucks from the dealer.

[superu]

You are freaking nuts going over that block at that speed! Nicely done though.
:twisted: :twisted: :cool: :twisted: :twisted:
Thanks!
1.5" clearance to spare MINIMUM, thus the courage of my convictions :grin:

[geckoboy86]

Figured out I have a power steering leak...gotta track down where, but I'm betting it is the pump, and that its gonna be expensive. :-(

I had a leaking one. Mine was between the reservoir and pump. Instead of the hassle of tearing it apart, plus thats a system I've been wanting to flush, I just got a used one with less wear on it. Mine is now from an 03 Impreza RS.

Everything bolted up for the most part. The main line was an issue. Mine was a bolt on the line and the new one was a banjo bolt. They were different sizes but there is a fitting on the pump that I swapped from my old one.

[Okin DaVanh]

Installed my Oil Pressure switch. Didn't need 1, just swapping them out 1 by 1. Temp Sensor is next.


Found out my Pitch Stop is on it's way out the door. Thinking of replacing it with an aftermarket 1, but I don't want 1 that makes it shift like a track rat...


Decisions... decisions.

[Huffer]

DIY the pitch stop. Or pick up one from a WRX owner. Less miles, same part.

[superu]

DIY the pitch stop. Or pick up one from a WRX owner. Less miles, same part.

duh!
:smt017


:smt002

[98legwag]

I looked at mine today (day off, didn't go anywhere). Two friends each ordered JDM projectors off ebay for their BD's.

[Okin DaVanh]

DIY the pitch stop. Or pick up one from a WRX owner. Less miles, same part.


Thanks for reminding me. :lol:

[Soul Shinobi]

My friend asked me to pull my car into the garage so he could brainstorm about his custom turbo setup while his car was out to get an uppipe fabbed, so I finally did a few small things.

Increased tire pressure to 35 psi, adjusted clutch cable freeplay, adjusted brake pedal freeplay, sucked out some engine oil (way over full! :shock: ).

[03 Subaru GT]

Changed my oil today. Dropped in some Royal Purple and swapped in a better battery.

[Reason]

Installed my Oil Pressure switch. Didn't need 1, just swapping them out 1 by 1. Temp Sensor is next.


Found out my Pitch Stop is on it's way out the door. Thinking of replacing it with an aftermarket 1, but I don't want 1 that makes it shift like a track rat...


Decisions... decisions.

Get a Group N mount, even aftermarket wouldn't be bad with shifting. It's the extra noise at first, im so used to it I don't notice it at all.

[mihleg]

Changed oil, pcv, and battery, optima mmmmmmm yummy.

[Perdue]

I had the day off so, after taking some much needed time for sleeping in, I went out and checked to see where my power steering is leaking at. It looks like it is leaking from the o-ring where the tank meets the pump, so i ordered a rebuild kit. It also dawned on me that I'm not even sire what car that my motor is out of, so I'm hoping it ends up being the right one. I have hated driving to truck the past couple days. I topped off the fluid, but haven't driven it yet so I don't know if that will fix my squeeling when I'm turning.

I had planned to install my stereo today, but seeing as it was so nice, I tackled my wheels instead. Rustoleum semi-gloss black. I didn't get food coverage between a couple spokes, but its ok. That's what I get for rushing...they are just winter wheels. Stereo tomorrow if it doesn't rain too bad.

http://img.photobucket.com/albums/v483/ ... AG0181.jpg (http://img.photobucket.com/albums/v483/perdue82385/IMAG0181.jpg)

[98legwag]

Went outside to find a completely flat left rear tire with a screw in it. Called some places and none could patch it today. :smt021

Also got my SLI decal today!

[r3v_v3ng3]

Just finished fab/install a 2.5 inch exhaust system for my friends 96 legacy with a 01 2.5rs engine.

contrary to what people are saying about a 2.5 piping, it actually has a nice deep rumble. He loves it!

ebay uel header
2.5" piping (high flow converter, 20" resonator and obx oval muffler [tr08-25c])

[Wiscon_Mark]

contrary to what people are saying about a 2.5 piping, it actually has a nice deep rumble. He loves it!

I don't think I've ever had anyone say the bigger piping has bad sound, it's more about having too wide of piping that creates backpressure and hurts exhaust flow on a low power N/A engine.

That being said, it's nice to have good rumble :)

[Perdue]

The larger pipe causes a decrease in backpressure, which hurts the exhaust's ability to scavage gases in an NA motor. I never really seemed to have a problem on the outback and it was 2.5"

[Soul Shinobi]

It doesn't seem to be much on an issue on Subaru NA's, I suspect that the exhaust ports on the heads are restrictive enough. Larger headers on NA's seems to yield tons of extra torque.

[RS MN]

Got the Wrx some shell rotella t6, and drifted the Wrx and the legacy in the first substaintial snowfall of the year.

[d1giPhux]

Installed New OEM Positive battery terminal, cleaned all connections, installed 2 new drive belts, ran subaru fuel injector into tank, cleaned engine with subaru top engine cleaner (didnt get much carbon smoke at all).

[Okin DaVanh]

Replaced my Pitch Stop and Temp sensor today. a difference. Now I'm leaning towards modifying. LOL!

Also got some extra parts from the puller. Sunglass holder from an Outback and the spare tire accessory tray without the lid. (Might be getting rid of them tho).

[Perdue]

I decided last night that I would paint my grill semi-gloss black as well, and reinstall it. The main reason I have always hated the USDM grill is the chrome. I think it looks good. I also too an hour or so to pull the headunit out of the truck and put it into the car...Ahhhh...the difference between a walmart pioneer and this alpine is unexplainable. It's even better to have the USB and auxiliary input. I'm going to try and tackle the XM radio transfer, as well as my subwoofer on my next day off.

https://sl-i.net/FORUM/images/imported/2011/11/IMAG0183-1.jpg

[98legwag]

Replace inner and outer tie rods and wired up the fog lights. Tie rods took about an hour then getting it aligned well enough to drive home from my friends took about another hour. Fog lights took awhile since we had to run out to buy more wire.

[Dead91silvia]

Had to jump start my BD... time for a new battery... ugh...

[RS MN]

Possiblyloading a group n speed density map with spark cut launch control and antilag to my wrx ecu very soon.

[eekay]

Possiblyloading a group n speed density map with spark cut launch control and antilag to my wrx ecu very soon.
What kind of software are you using for the tune(s)?

[RS MN]

Romraider with a tactrix cable.

[02_Legacy]

Today I bought an STi catback, UEL Borla Replicas, and Some header wrap! :twisted:

[eekay]

Bought my Chargespeed Type-2 full body lip kit and rear roof wing for my wagon today... So, time to begin thinking about what I want to do externally to the car, get it ready and begin painting!

[Dead91silvia]

Still have a sunroof leak on my BH... :smt017 At least the front and rear sunroofs work now! Maybe it just needs some adjusting...

[Soul Shinobi]

I've had trouble with the sunroof drain holes just being clogged. Sticking a coat hanger down them and blowing compressed air through worked for me then.

[Grafton]

got 17" winter tires on my wife's outback and an alignment yea credit card

[geckoboy86]

Got a roof rack!
https://sl-i.net/FORUM/images/imported/2011/11/IMG_2784-1.jpg

[ElbryanWolf]

First snow today :) A little bit of drifting ;)

-Wolf-

[Perdue]

Looks awfully familiar gecko lol :grin:

[geckoboy86]

LOL. Just a bit. I need some help with my fitment of it. I PM'd you about it.

[TGX4776]

put my wheels and lugs on today

https://sl-i.net/FORUM/images/imported/2011/11/IMAG00431-1.jpg

[httrdd]

Nice. Brought the rs spoiler home from work and plan the install this weekend! Nice and shiney! :cool: Hood amd hood scoop will be done and molded then under some spray cans of primer.

[Dead91silvia]

Finally found some new trunk peaces for my BH and got a new center light for it... I think in the morning I'm gonna work on switching out my driver control arm, the tail light and get the car ready for some snow...

[Okin DaVanh]

Nothing........... But I did start the hunt for parts to rebuild the E36. Went to a few yards, and found a BG tucked away in a holding pen. Waiting for them to put it in the yard, and I'm THERE! 1st thing Saturday morning! :smt023

[98legwag]

Detailed it. Wash, rubbing compound, Mother's Sealer and Glaze, Mother's California Gold Carnuba wax. Paint still shows its age....however, it does look a lot better.

[eekay]

Ordered a few cases of Eneos along with a few K&N oil filters for my upcoming oil change.

[geckoboy86]

Ordered a few cases of Eneos along with a few K&N oil filters for my upcoming oil change.

I've never heard of that brand.

[subie/legacy]

Installed my side skirts finally, and got the stock L mud flaps mounted. didn't turn out to bad.

[Danny-G]

Full tank of gas. Thats all.

[eekay]

Ordered a few cases of Eneos along with a few K&N oil filters for my upcoming oil change.

I've never heard of that brand.
Seriously? Best oil E-V-E-R! :)

[eekay]

Got denied my Chargespeed full lip kit and wing. They're no longer available. :( So, I've turned to Hippo Sleek in hopes that they'll be able to provide a kit...

[TGX4776]

WOo HOO Pulled a P0305 today on my way to work. started off flashing really slowly (on, off for a second, on, off for a second. more off then on) pulled over. turned off the engine and turned it back on. stayed steady after that. it's my only code. From what i read on here it is most likely that i need to have the valves adjusted or that i have burned valves.... yay.

I'm starting to think

http://www.youtube.com/watch?v=5_swaxOidGU

[eekay]

Did you notice that your car was running and/or starting poorly? Generally, this just means misfiring. Check your spark plugs, wires and coil pack. Might just be something stupid...

[TGX4776]

nah it was running fine until this morning. I'll be picking up plugs and wires next week then go from there. I have a mechanic checking it out then as well but I already have about 2k worth of work that needs done so I really have to think about whether or not its worth it to fix this up or buy another.

[eekay]

2K?! What exactly needs to be done? Someone here is selling an EJ20R long block & ECU for $1500.00 USD shipped. I'd do that WAY before I paid $2K for a restoration...

[TGX4776]

Timing belt, engine and trans mounts, oil pan, major rust repair, paint, and a few other things. If replacing the plugs and wires fixes it then thats fine but if it gets much more expensive i have my eye on a black wagon

[eekay]

The timing belt, while tedious, is actually not too difficult to do yourself. The engine and transmission mounts are a piece of cake! Don't junk it! ;) However, a black wagon is always tempting...

[TGX4776]

if it wasnt for the rust it would be no issue.

[eekay]

Yeah. That stuff can be a pain. Although, generally a nice, complete day of brushing, sanding and bondoing can certainly help. How much rust do you actually have? Lol

[TGX4776]

http://s929.photobucket.com/albums/ad133/TGX4776/rust/ its all rusted through. Started from the inside out

this was 9 months ago. it's alot worse now

[eekay]

Bummer! That is quite a bit of rust. Rusted all the way through does suck. Although, you can fix it by welding and grinding in some new metal. How long that will last, I have no idea. WV with it's super humid and salty air would have me irate!

[eekay]

Ordered '04 STi slotted rotors and '04 STi Brembo brake calipers (front and rear) also ordered a BC Racing coilover kit for the wagon. Gonna be a fun winter, apparently.

[Wiscon_Mark]

You know where that rust comes from? The holes for that plastic guard that runs along the wheel well right next to it. Something designed (poorly) to prevent rust...

[eekay]

Agreed. I've actually removed those guards and sealed those holes on my Gen2's.

[MRLancaster]

Went on the cruise with a bunch of friends....one of many pictures to come!
https://sl-i.net/FORUM/images/imported/2011/11/386427_10150957163115162_788085161_21887-1.jpg

[Soul Shinobi]

It's hard to get over how clean your car always is.

[MRLancaster]

Thanks hahaha, the interior is another story!

[MarkSubi]

lol Nice yeah my subie is always clean. in and out. but Today I'm trying to find out where some oil is leaking from and thus far it isn't where you would expect it to be leaking from.

[Okin DaVanh]

Installed my factory leather shift gaiter and black shifter surround. Cleaned up my interior and trunk of "stuff" and stripped and waxed the body over again.

also:

-Found out my drivers' inner tie rod boot is off (didn't see that before :smt017 )


-My hoses (upper or lower) haven't been building up pressure in them. I'm wondering when they did the headgaskets, if they replaced the waterpump or thermostat??? or both? No overheating, just went halfway once and I caught it. Hence why I'm leaning to the pump going bad. AmIwrong?

-My center diff was overfilled by the PO's shop. :smt011 Got to drain and refill that the right way. Thank you PO as that was the only thing I didn't check the first time around.

Anyways... More to check.

[grayguy]

Today I was yet again, the demise of another SS that was just too gone to save. It was sacrificed to the Subaru gods so another 97' GT can live on and be prosperous.

https://sl-i.net/FORUM/images/imported/2011/11/b493515c-1.jpg

[eekay]

Bummer! Always sad to see those things go. Getting pretty rare nowadays! On a side note, I like the pick in the top of the car to declare it deceased... Nice touch!

[Danny-G]

Today I was yet again, the demise of another SS that was just too gone to save. It was sacrificed to the Subaru gods so another 97' GT can live on and be prosperous.

https://sl-i.net/FORUM/images/imported/2011/11/b493515c-1.jpg
Any chance of parting with the rear wing and wiring?

[grayguy]

My friend took the motor/ wiring harnesss for his karmanghia, and the wing...let's just say John Deere excavator 1- Subaru 0

[eekay]

I believe he's talking about the rear wing and the rear wing wires. Shouldn't be too much trouble. :)

[r3v_v3ng3]

Made a fender brace for my bd

https://sl-i.net/FORUM/images/imported/2011/11/fenderbrace-1.jpg

[httrdd]

What is the point of the fender brace? Ready to sell me those fenders yet? Lol.

[Okin DaVanh]

What is the point of the fender brace? Ready to sell me those fenders yet? Lol.


Chassis flex.


And why do a lot of people want to buy parts out from underneath someone? :lol: At least let the guy enjoy his car before hounding him to strip it and make your car look better than his. :lol:

Seriously tho, I never got it. I've posted a pic of my other car, and the following 3 posts after, where asking me to sell them my rims etc... It wasn't a FS post. Anywho..... Your car doesn't need a thing Httrdd. It's bada$$ as is.

[drft204]

i've updated the car's "member's ride" thread =)

https://sl-i.net/FORUM/viewtopic.php?f=6&t=21251

[httrdd]

What is the point of the fender brace? Ready to sell me those fenders yet? Lol.


Chassis flex.


And why do a lot of people want to buy parts out from underneath someone? :lol: At least let the guy enjoy his car before hounding him to strip it and make your car look better than his. :lol:

Seriously tho, I never got it. I've posted a pic of my other car, and the following 3 posts after, where asking me to sell them my rims etc... It wasn't a FS post. Anywho..... Your car doesn't need a thing Httrdd. It's bada$$ as is.

Lol everyone has a price! Seriously though I am just asking him that, because it shows how much I love that style of fender. I want my car to be even more badassier! :smt023

[r3v_v3ng3]

What is the point of the fender brace? Ready to sell me those fenders yet? Lol.


To stiffen up the front end from a chassis flex (vertical), better handling specially on cornering. Also when you jack up the car and have jack stands on both side, your front end won't sag. Your door will close better. Front end feels much stiffer. Almost ready to sell those flares. Been too busy (school,work, side job,family and about to move). Hopefully I will find time during the xmas vacation or it will be in my new years resolution lol :grin:


Here's from ultraracing, look at fender brace
http://www.ultraracing.my/template.asp?menuid=30

[Huffer]

I drove mine today. 05 Baja wheels and Hankook W300 Icebears going on this week.

[httrdd]

What is the point of the fender brace? Ready to sell me those fenders yet? Lol.


To stiffen up the front end from a chassis flex (vertical), better handling specially on cornering. Also when you jack up the car and have jack stands on both side, your front end won't sag. Your door will close better. Front end feels much stiffer. Almost ready to sell those flares. Been too busy (school,work, side job,family and about to move). Hopefully I will find time during the xmas vacation or it will be in my new years resolution lol :grin:


Here's from ultraracing, look at fender brace
http://www.ultraracing.my/template.asp?menuid=30

Thanks for the explination and link. Saved to favorites. I am already starting to find some nice flares and run 17x8 wheels with like 235 or 245 tires. Might just steal the honda fenders idea. After the hood is molded with scoop, flares are on and eveything is where I want it, I will go for a paint job.

Love the way your car is coming together! Nice job.

[r3v_v3ng3]

thanks! Yours is coming along real well also. What offset wheels? I think you might get away with just a roll and pull the fenders.

It actually wasn't my intention to put flares on mine. Pre ordered the xxr 527 18x8.75 +35 (with roll n pull fenders) early December 2010. Suppose to come out early new years of 2011. Then it got dragged on for like 6-7 months. Finally they came out but only 17/18 x 9.75 with really low offset +25/+20. Started seeing them on 240's and some subie. I called nlmotoring and they said that the 8.75+35 won't come out for another 1-2 months. I finally got tired of waiting and grabbed what they had in stock 18x9.75+20 but it all worked out in the end :lol:

[httrdd]

More pics in my members ride thread.

https://sl-i.net/FORUM/images/imported/2011/12/20111201_090557_11-1.jpg

[superu]

[re]mounted the spare on the roof rack

(here's my system)

https://sl-i.net/FORUM/images/imported/2011/12/P1050319JPG-1.jpghttps://sl-i.net/FORUM/images/imported/2011/12/P1050320JPG-1.jpg
https://sl-i.net/FORUM/images/imported/2011/12/P1050321JPG-1.jpghttps://sl-i.net/FORUM/images/imported/2011/12/P1050322JPG-1.jpg
https://sl-i.net/FORUM/images/imported/2011/12/P1050323JPG-1.jpghttps://sl-i.net/FORUM/images/imported/2011/12/P1050324JPG-1.jpg
https://sl-i.net/FORUM/images/imported/2011/12/P1050325JPG-1.jpghttps://sl-i.net/FORUM/images/imported/2011/12/P1050327JPG-1.jpg

https://sl-i.net/FORUM/images/imported/2011/12/P1050318JPG-1.jpg

YEAH winter, c'mon down!!

[prodriver1]

[re]mounted the spare on the roof rack

(here's my system)

https://sl-i.net/FORUM/images/imported/2011/12/P1050319JPG-1.jpghttps://sl-i.net/FORUM/images/imported/2011/12/P1050320JPG-1.jpg
https://sl-i.net/FORUM/images/imported/2011/12/P1050321JPG-1.jpghttps://sl-i.net/FORUM/images/imported/2011/12/P1050322JPG-1.jpg
https://sl-i.net/FORUM/images/imported/2011/12/P1050323JPG-1.jpghttps://sl-i.net/FORUM/images/imported/2011/12/P1050324JPG-1.jpg
https://sl-i.net/FORUM/images/imported/2011/12/P1050325JPG-1.jpghttps://sl-i.net/FORUM/images/imported/2011/12/P1050327JPG-1.jpg

https://sl-i.net/FORUM/images/imported/2011/12/P1050318JPG-1.jpg

YEAH winter, c'mon down!!
I want one of those racks soooo bad! :smt023 gota get the bumpers first though. :smt023

[Okin DaVanh]

[re]mounted the spare on the roof rack

(here's my system)

YEAH winter, c'mon down!!






Nice. Have you thought of maybe getting a spare tire cover off a Jeep or SUV to cover it and keep it from oxidizing the threads? After all, snow does come from above. Might have your spare looking like a bowl of cereal too :wink:

[superu]

Nice. Have you thought of maybe getting a spare tire cover off a Jeep or SUV to cover it . . .

YES, I've just never taken the next step, and ACTUALLY looked for one ;)

I think they might not come small enough for a 27" tire, but maybe they do...

**EDIT**
Al ya have to do is get off the damn computer and run down to the parts store!!

Yup, When I did, I found out for $20 a cover goes from 26.5" to 29.5"

SOOOO, YES, I have thought about it, AND [just] bought one. Thanks a lot for that push!! :smt023

[superu]

I want one of those racks soooo bad! :smt023 gota get the bumpers first though. :smt023

Mine's just a BVG (Bauer Vehicle Gear) generic basket. Here are some others that seem fine
http://www.discountramps.com/car-top-carriers-roof-racks.htm

get to it on your bumper design!! I'm thinking about doing a rear one and integrating the hitch there. I'd regain a better departure angle and have more awesomeness!! :smt004
do you have thoughts for a rear tube bumper?? they're kind of tricky b/c the skin covers up a bunch of unsighlty vents and such back there...

[Huffer]

Teaser pics of ONE of my winter setups:
https://sl-i.net/FORUM/images/imported/2011/12/ed514de7-1.jpg
https://sl-i.net/FORUM/images/imported/2011/12/c1589910-1.jpg

[prodriver1]

I want one of those racks soooo bad! :smt023 gota get the bumpers first though. :smt023

Mine's just a BVG (Bauer Vehicle Gear) generic basket. Here are some others that seem fine
http://www.discountramps.com/car-top-carriers-roof-racks.htm

get to it on your bumper design!! I'm thinking about doing a rear one and integrating the hitch there. I'd regain a better departure angle and have more awesomeness!! :smt004
do you have thoughts for a rear tube bumper?? they're kind of tricky b/c the skin covers up a bunch of unsighlty vents and such back there...
going with the mudrat style front and rear. theirs a guy up here who does tube bumpers for offroad trucks and I'm getting the hookup from my wife's cousin.

[MarkSubi]

Nothing yet but my coilovers for my BD came today.

[eekay]

Mine too! Which coilovers did you end up getting?

[Wiscon_Mark]

You've got a wide track going on there Huffer.

[MarkSubi]

Mine too! Which coilovers did you end up getting?


I went with the Racelands wbu? :smt023

[eekay]

After browsing online, I went with the BC's... Not sure how good they're be, but everyone else seems extremely happy with them for the price.

I'm curious to see how well the Racelands treat you... Keep us posted! I'll do the same.

[Huffer]

You've got a wide track going on there Huffer.

Dude! I'm doing the 10min trainer by Tony Horton. I've lost 5lbs already. :grin:

[Soul Shinobi]

Good for you man; just eat right, that's half of working out! Unless I missed something and we're still talking about cars.

[Wiscon_Mark]

I have no idea what's going on now.

I was talking about the wide track with the wheels sticking out. But hey...

[prodriver1]

:smt005 :smt005 :smt005

You've got a wide track going on there Huffer.

Dude! I'm doing the 10min trainer by Tony Horton. I've lost 5lbs already. :grin:

[03 Subaru GT]

Changed out my coolant today and put in new pedals

[Okin DaVanh]

Picked up ANOTHER 96 GT front today from Soul Shinobi. Thanks for the front cover. Also, traded Nemesis my non-scooped hood for a GT/OB hood too. I'll update my MR thread for pics.

[Soul Shinobi]

No problem, thanks for taking it off my hands!

[MRLancaster]

https://sl-i.net/FORUM/images/imported/2011/12/1203111636-1.jpg

Still have to finish it, but working on the spoiler finally :)

[httrdd]

Nice. Same exact color? Rattle canned?

[MRLancaster]

Its the closest I could find at the autostore. Its canned, in the summer I will get it done professionally

[98legwag]

Got an Outback hood and wagon spoiler from a pick and pull. And they happen to be the same color as my car! Although the spoiler needs to be repainted.

[MarkSubi]

Installed my coilovers and loving them thus far. :smt040

[eekay]

Can't wait to do my coilovers... I have a lot of stuff for my car that needs to go on. Lol. Still waiting for my coilover rear camber plates though.

[MRLancaster]

https://sl-i.net/FORUM/images/imported/2011/12/1204110852a-1.jpg
Waiting for the seals to dry! :3

[Huffer]

https://sl-i.net/FORUM/images/imported/2011/12/1142cb9e-1.jpg

[MarkSubi]

Can't wait to do my coilovers... I have a lot of stuff for my car that needs to go on. Lol. Still waiting for my coilover rear camber plates though.


Sweet, what else are you doing to it? and badass. Id definitely would love to have rear camber plates but not sure if racelands ever came out with a set.

[98legwag]

https://sl-i.net/FORUM/images/imported/2011/12/1204110852a-1.jpg
Waiting for the seals to dry! :3

Very nice. Did you drill into the hatch? Also, what did you you use for seals? I am putting a spoiler on soon.

[MRLancaster]

https://sl-i.net/FORUM/images/imported/2011/12/1204111309-1.jpg

I drilled, and used this automotive seal stuff from advanced.

[Soul Shinobi]

You can see it's slightly off color but it does look good. I love the bronze wheels.

[MRLancaster]

Yeah, its some GM colour, not too different, was worried how off it would be. lol

[Dead91silvia]

Installed new trunk panels in my BH... Pushed my BD out of the way... Not only does it need HG's, the battery is junk... ugh...

[httrdd]

Making the final patching and painting to be wingless. Bondo and prep for paint. Picking up some 60,000 mile 2.5rs front seats for 50 bucks! Has "Subaru" into headrests. Meeting him in philadelphia and while i am there go shopping at King of Prussa with the family.

[eekay]

Cripes! How do all you guys keep meeting these people with seats?! I've been looking for seats FOREVER... Of course, I'm looking for heated STi seats. Front and rear (rears not heated)

[httrdd]

They are out there. Rare to find them, but they are out there. Lol.

[httrdd]

The seats. Both are identical, but only put up one pic.

https://sl-i.net/FORUM/images/imported/2011/12/IMG954834-1.jpg

[Okin DaVanh]

They are out there. Rare to find them, but they are out there. Lol.
True. I just came across 2 sets, but won't be getting either til the Holidays are over.

[Dead91silvia]

I keep thinking about STi seats, but I love my leather too much and they are still in awesome shape!

[httrdd]

I hate leather. Lol.

[eekay]

Love the leather for the daily. Heated leather would be awesome too. I've been considering just doing my own heated seat setup... We'll see.

[Danny-G]

New alternator. Nothing amazing.

[eekay]

Just a quick teaser of what's to come for the Assault wagon.

Titan rear spoiler lip
JDM aluminum Legacy kick guards (all 5)
JDM Momo wheel
Top Speed Performance header nice and wrapped
Whiteline front and rear 22mm sways
Stainless steel brake lines
'04 STi slotted rotors front and rear
Brembo gold big brake kit front and rear
BC Racing coilovers (with rear camber plates)
And, of course, my K&N oil filters and Eneos 5W40 for my next oil change!

Kinda crappy cell phone pictures but whatevs...

http://www.purplehat.org/~ek/teaser/20111205_154353.jpg
http://www.purplehat.org/~ek/teaser/20111205_154430.jpg

[MRLancaster]

How much was the rear lip if you dont mind me asking.

[httrdd]

Picked up my seats and spent a buch of money christmas shopping at king of prussia! Seats are phenomenal!

[eekay]

How much was the rear lip if you dont mind me asking.
I believe it was 220-ish shipped from JM Auto Racing. Granted, this rear lip is for a BH, not a BG. It'll take some modification...

[prodriver1]

Cripes! How do all you guys keep meeting these people with seats?! I've been looking for seats FOREVER... Of course, I'm looking for heated STi seats. Front and rear (rears not heated)
I have heated 07 rs seats and the rear (not heated ;) ) they are the gray and black ones, you want?

[superu]

Just a quick teaser of what's to come for the Assault wagon.

Titan rear spoiler lip
JDM aluminum Legacy kick guards (all 5)
JDM Momo wheel
Top Speed Performance header nice and wrapped
Whiteline front and rear 22mm sways
Stainless steel brake lines
'04 STi slotted rotors front and rear
Brembo gold big brake kit front and rear
BC Racing coilovers (with rear camber plates)
And, of course, my K&N oil filters and Eneos 5W40 for my next oil change!

Kinda crappy cell phone pictures but whatevs...

https://sl-i.net/FORUM/
https://sl-i.net/FORUM/


Woah X-mas came early!!! :shock: :smt002

Yeah I'm surprise you're having a hard time finding seats, being in Denver and all, I figured they'd be falling out of the sky and all there! :-?

they'll come, I'm sure of it!

[Wiscon_Mark]

Wow. That is Christmas 3 times over.

[eekay]

Cripes! How do all you guys keep meeting these people with seats?! I've been looking for seats FOREVER... Of course, I'm looking for heated STi seats. Front and rear (rears not heated)
I have heated 07 rs seats and the rear (not heated ;) ) they are the gray and black ones, you want?
Pics? Are the rear seats for a wagon, by chance? I just may want. :) Although, shipping from Minnesnowta might cost bundles...

[eekay]

Woah X-mas came early!!! :shock: :smt002

Yeah I'm surprise you're having a hard time finding seats, being in Denver and all, I figured they'd be falling out of the sky and all there! :-?

they'll come, I'm sure of it!
Haha. Yeah, you would think so. Problem is, there are so many Scoobers out here that used parts go fast. Junk yard Subarus are sucked dry within 3 hours of arrival. Lol.

[03 Subaru GT]

Installed my OBX headers today. Exhauat arrives on Friday. Excited is an understatement for me right now

[Dead91silvia]

Did a full detail tonight on my BH! Also switched out my crappy tires with the wheels and Fusions from my BD to my BH. And fixed my Aigbags with a new clock spring from Subaru. Then my clutch master blew out so I replaced my clutch master, soft line, and slave... It's been a long day!

Now for a 400 mile trip tomorrow to see my girl! :love3:

[ubar legacy]

Got my car cleaned up. Going to go look at a buddys car cause he wants to trade. Hes got an impreza with a jdm ej20g engine, and a whole jdm front end (still lhd). With mods! So excited!! I hope everything works out

[httrdd]

Nice man make sure to take pics.

[prodriver1]

Cripes! How do all you guys keep meeting these people with seats?! I've been looking for seats FOREVER... Of course, I'm looking for heated STi seats. Front and rear (rears not heated)
I have heated 07 rs seats and the rear (not heated ;) ) they are the gray and black ones, you want?
Pics? Are the rear seats for a wagon, by chance? I just may want. :) Although, shipping from Minnesnowta might cost bundles...
I have pics of them on legacygt and here somewhere or I can email them to you, no they are not for a wagon, I'd give the condition a 8/10, driver seat is warn on the bolster from getting in and out (normal) they come from a non smoking car no significant rips or stains.

http://legacygt.com/forums/attachment.p ... 1256846843 pics :smt023 http://legacygt.com/forums/attachment.p ... 1256846843

[ubar legacy]

Nice man make sure to take pics.
http://stcloud.craigslist.org/cto/2741945457.html
:) he posted it as a plan b, but I got first dibs. :)

[httrdd]

Nice project. Straight up trade or yours plus cash?

[ubar legacy]

Nice project. Straight up trade or yours plus cash?
Straight up!! This is the deal of a lifetime considering what my car is lol

[httrdd]

:smt023

[TGX4776]

Officially decided to get rid of it. Selling or Parting it out.

[Okin DaVanh]

Officially decided to get rid of it. Selling or Parting it out.
ohhh boy... Here comes the scavengers! :lol:

What's next? Saab?

[httrdd]

Caw caw....... what are you parting out performance wise?

[Okin DaVanh]

Caw caw....... what are you parting out performance wise?
:lol:

Soooo many people on another board I'm on, would try to buy parts off my other car without me even posting a FS thread or mentioning it! At least TGX announced it. Now, It's time to harvest on another BD so you can fill your pockets! :twisted:

I'd be interested in Headers....

[geckoboy86]

Got the RS Bumper on. More pics in my members ride link (check my sig)

Teaser (this was a no where near done fitting)
https://sl-i.net/FORUM/images/imported/2011/12/IMG_2864JPG-1.jpg

[eekay]

Looks really good! I expected it to stick out further in the front but it ended up matching up really nicely. Well done!

[httrdd]

Cool. I need to see a far shot.

[geckoboy86]

Also got in tire rotation and an oil change (Rotella T6 with a Bosch Filter)
Shitty part is I found a screw in one of my tires as I was rotating.

[Perdue]

Ordered headers from speesyracer yesterday morning and they already tried to deliver today...I wasn't home to sign for them so ill pick them up Tuesday when I get back.

[TGX4776]

Decided not to buy a forester and to stick with a legacy of some kind. I love my manual and space

[Danny-G]

Changed the oil and got a switch for each set of lights. Planning on wiring the fogs to the one switch thats not used right now. With it being winter and all, I figure having yellow lights to use would be a good thing. So a quick bit of wiring will be in order tomorrow.

[Soul Shinobi]

Got my rear saggy butt spacers in last night and discovered a HUGE rust hole while doing it. :smt022 On the passenger's side, if I stick my hand in the rear wheel well and try to touch the strut top, towards me (towards the outside of the car) there's a rust hole in the chassis I could stick my whole hand through. :shock: I guess that's what you get with $300 Craig's List cars! Don't ask me why I've put STI suspension on it!

[httrdd]

Whats your solution? I have those holes too. May need to get the work done.

[Soul Shinobi]

Considering what I paid for it and how rusty the rest of it is, the solution is going to be buy a BMW E46 325i or 330i. :-?

[Okin DaVanh]

Considering what I paid for it and how rusty the rest of it is, the solution is going to be buy a BMW E46 325i or 330i. :-?


How about a clean E36 shell? :wink:

[Soul Shinobi]

Haha, wish I had the time and space to be putting things together, but I just want something comfortable and fun to drive as soon as I can afford it.

[httrdd]

Stalled it 3 times. I never had a problem with fuel water freezing until recently. I drove to the store and putin an additive. Must be shitty fuel these days.

[Wiscon_Mark]

You would think with more ethanol in there, it would be less prone to freezing...

[TGX4776]

Looking for a baja near the DC area for $9k or less if anyone spots one.

[90lsturbo]

me and my 2 yr old went on a drive :grin: car is super dirty and now has 100 miles added to the ticker

[httrdd]

Thats what it is all about!

[Okin DaVanh]

Tore out the entertainment system, just to re-wire it again. Also took a trip to price out another M52 for my E36. Gawd, people think they need to triple charge you 'cause it's a BMW. :smt011 160k on an unknown maintenance motor with 30 day warranty for $1100??? :smt018 Needless to say, I'm still looking.

[Soul Shinobi]

Car is WAY more stable with the saggy butt spacers in! Must have for wagons with sedan suspension!

[Danny-G]

Fought with one wire for far too long but it was all worth it in the end.
https://sl-i.net/FORUM/images/imported/2011/12/1211111559-1.jpg
Twelve different sources of light. Yes, I said twelve. :D

[r3v_v3ng3]

Installed universal hidden windshield antenna and finally I can listen to radio station (couldn't for awhile since i shaved off the antenna.

Also installed whiteline rear diff support lock bushing and took out the slop on the rear end, Yay!

[d1giPhux]

Installed MSD coil, installed new fuel filter.

[httrdd]

Installed universal hidden windshield antenna and finally I can listen to radio station (couldn't for awhile since i shaved off the antenna.

Also installed whiteline rear diff support lock bushing and took out the slop on the rear end, Yay!

Please please provide a link to the one you purchased! I am wanting to do this so bad.

[Wiscon_Mark]

Twelve different sources of light. Yes, I said twelve. :D

Wow. You're so getting pulled over :lol:

How's the strain on the battery/alternator?

[httrdd]

Yea i remember another story from (whats his name) the cop said there is a max number of lights you can run.

[prodriver1]

Decided not to buy a forester and to stick with a legacy of some kind. I love my manual and space
get an outback, the greatest thing subaru ever made :smt023

[Okin DaVanh]

Yea i remember another story from (whats his name) the cop said there is a max number of lights you can run.


Zuesbannedsomething :smt002

[Perdue]

In this state, you can only have two pairs of lights on at a time and there is a limit on candlepower, but I can't recall what it is.

[eekay]

Fought with one wire for far too long but it was all worth it in the end.
https://sl-i.net/FORUM/images/imported/2011/12/1211111559-1.jpg
Twelve different sources of light. Yes, I said twelve. :D
I see 14? *shrug*

[02_Legacy]

Noticed spots on driveway so i took a peak under my car and my water pump is leaking :-(
Are the water pumps on these known to leak or do you think it would be the gasket? With the amount it is leaking I would think it is the gasket but I don't really know.

[httrdd]

There is a weap hole it would be leaking out of if it failed and it would be leaking at mounting surface if it was gasket. Some times when a pump is failing it may only leak at times, so if you see the leaking go away then dont assume your problem has.

[Okin DaVanh]

There is a weap hole it would be leaking out of if it failed and it would be leaking at mounting surface if it was gasket. Some times when a pump is failing it may only leak at times, so if you see the leaking go away then dont assume your problem has.
This, and some make humming noises when they're on the wy out.

[02_Legacy]

OK thanks guys I'll have to pull the timing cover off and take a look. I'm going to be parking my car for a couple weeks so I can work on it then.

[TGX4776]

Decided not to buy a forester and to stick with a legacy of some kind. I love my manual and space
get an outback, the greatest thing subaru ever made :smt023


I haven't found one i like yet... I'd love a baja but i havent found one thats close enough in my price bracket that isn't at a shady dealer. I'll be looking at a 04 impreza ts on wednesday

[Dead91silvia]

^ Impreza's are not at all as nice as Legacy's or Foresters, IMO... I like Foresters personally, not much of an Outback fan though, but thats me...

Just got home from a 800+ mile road trip to spend time with the lady friend! Car did great, till my CEL came on about 9 miles from home... ugh...

[TGX4776]

^ Impreza's are not at all as nice as Legacy's or Foresters, IMO... I like Foresters personally, not much of an Outback fan though, but thats me...

Just got home from a 800+ mile road trip to spend time with the lady friend! Car did great, till my CEL came on about 9 miles from home... ugh...


yeah i am finding that out. i wouldn't mind a forester XS but i cant find one in good condition for my price range. The impreza while bare bones is low mileage and priced right for the model. I always get worried when a car is priced a few k under Blue book

[eekay]

I always think that older Legacy's and Foresters are priced lower than Blue Book. But, that's only because I know how much they're actually worth. :) Let alone the amount of time and money I've put into mine... If my car only sold for 8K, I'd probably die.

[r3v_v3ng3]

Spent 2 hrs installing whiteline steering bushing. Mine was a PITA cause one of the bushing pretty much burned into the rack and it was hard to peel it off :smt013

[httrdd]

Did you go to the faster STi rack or just stock?

[98legwag]

Picked up a cargo mat. Also my neighbor got hit over the weekend and his GF OBS is totaled. He let me take the fog lights. They are the square-ish glass ones. Now I just need to figure out if I want to use them and where to put them....

[Soul Shinobi]

Spent 2 hrs installing whiteline steering bushing. Mine was a PITA cause one of the bushing pretty much burned into the rack and it was hard to peel it off :smt013
I've done them on three cars, it never gets easier...

[r3v_v3ng3]

Did you go to the faster STi rack or just stock?


Just stock but it looks like I need to replace it because its leaking. I'll take it down again later to cut weld the subframe for the turbo uppipe

[r3v_v3ng3]

Finally washed my car after 2 months lol

[drtylggy]

Drove to school and back. Then realized the 'clear coat polish' from cloister car wash doesn't come off the headlights too easily :smt013

[Dead91silvia]

I always think that older Legacy's and Foresters are priced lower than Blue Book. But, that's only because I know how much they're actually worth. :) Let alone the amount of time and money I've put into mine... If my car only sold for 8K, I'd probably die.

I know huh?! Someone asked me "whats your White car worth?" (My BD).... I said I would let it go for $8K... After all the JDM parts and even more so my bumper, I would have hard time wanting to sell it!

I'm getting ready to put my BH up for sale in January, would like to get $7K with all the work I have done to the stupid thing... Next owners wont have anything big to do for a long time thats for sure! All the big stuff has been done! Well, other then HG's but they seem to be fine ATM....

[eekay]

The BE/BH HG's were no where near as bad as the 2nd gens. They should hold up for the life of the motor, really. Although, any time I pull a Scoober engine I ALWAYS replace the HG's. :)

As far as work on my cars, I'm in the same boat. Hell, for my BD (when it's finished) I wouldn't take anything less than 20K! Lol.

[superu]

. . . I'm in the same boat. Hell, for my BD (when it's finished) I wouldn't take anything less than 20K! Lol.

BUT, is there ever a "done?"

once you go down that modifying road, you know this, there IS no final destination. :smt028 :smt031

[drft204]

Got this in yesterday

http://30.media.tumblr.com/tumblr_lw7kg7HR0G1qaeqv7o1_500.png

http://27.media.tumblr.com/tumblr_lw7p13DV2h1qaeqv7o1_500.png

[eekay]

. . . I'm in the same boat. Hell, for my BD (when it's finished) I wouldn't take anything less than 20K! Lol.

BUT, is there ever a "done?"

once you go down that modifying road, you know this, there IS no final destination. :smt028 :smt031
Haha. This is very true...

[Dead91silvia]

^ yep!

[Wiscon_Mark]

https://sl-i.net/FORUM/


:shock:

Do you have a bunch of kids in the back or something?

[MarkSubi]

Got this in yesterday

https://sl-i.net/FORUM/

https://sl-i.net/FORUM/

lol Ive had one of these in my BD forever now. Looks like I'm not the only person on SLI with one anymore :smt023

[drft204]

I've waited for this thing for so long. had one in my old vw

[MarkSubi]

I've waited for this thing for so long. had one in my old vw


Ah Nice yeah I have one in my sedan BD but I just drilled it in but thats because I wanted to keep my sun visors.

[98legwag]

Got this in yesterday

https://sl-i.net/FORUM/

https://sl-i.net/FORUM/

lol Ive had one of these in my BD forever now. Looks like I'm not the only person on SLI with one anymore :smt023


Rubie_25GT has one too.

[prodriver1]

Decided not to buy a forester and to stick with a legacy of some kind. I love my manual and space
get an outback, the greatest thing subaru ever made :smt023


I haven't found one i like yet... I'd love a baja but i havent found one thats close enough in my price bracket that isn't at a shady dealer. I'll be looking at a 04 impreza ts on wednesday
you could buy mine:)

[httrdd]

Car was stalling recently in the morning and could not figure out why. I though it was frozen water/ slush in the tank so filled it up and put an additive in. Well this morning it happened again. Spoke to a buddy and he recomended changing the fuel filter. Wow what a difference. Fires right up and idles better. We will see how the morning plays out.

[Soul Shinobi]

I was going to say seafoam/carb clean the idle air control valve, but good!

[httrdd]

Yea i need a nice parking lot to do that.

[TGX4776]

Decided not to buy a forester and to stick with a legacy of some kind. I love my manual and space
get an outback, the greatest thing subaru ever made :smt023


I haven't found one i like yet... I'd love a baja but i havent found one thats close enough in my price bracket that isn't at a shady dealer. I'll be looking at a 04 impreza ts on wednesday
you could buy mine:)


you have a baja?

[xoSubieLegacyxo]

Got this in yesterday

WAY ahead of ya! lol

https://sl-i.net/FORUM/

I replaced the valve cover gaskets, threw on a factory exhaust, and started the "power mode" mod. Hope to have everything buttoned up by tomorrow evening.

[02_Legacy]

Got my borla replica headers on today, first impressions- very little. Slight sound change but I am running 100% sock exhaust otherwise oh and header wrap stinks horribly when it is heated the first time.

[MRLancaster]

Got bored on the computer and chopped a my old hood scoop onto the car. Looks good, I wouldn't run the STI scoop again though.
https://sl-i.net/FORUM/images/imported/2011/12/scoop2png-1.jpg

[httrdd]

Why not? I think it looks good.

[MRLancaster]

If I ever do change hoods, I will get the Legacy gt hood. The STi scoop just seemed too large at certain angles before
https://sl-i.net/FORUM/images/imported/2011/12/DSC_0581-1.jpg

https://sl-i.net/FORUM/images/imported/2011/02/0203011331-1.jpg

[eekay]

That scoop is going on my wagon as well. But, I'm gonna need it for oversized TMIC.

[httrdd]

That 04-05 scoop is huge. The one you posted on your car looks like 06-07 ish. Plenty of clearance, but looks like it fits in there.

[eekay]

Erm? My car?

[httrdd]

No lancaster. The scoop looks good from the front, but is so wierd looking from the side.

[eekay]

Haha. Wait until you see it on my wagon... Although fully functional, I'm sure it'll attract attention. Kinda sucks. But, I need the air!

[MarkSubi]

Put woodgrain trim in the subie lastnight, looks dope. :smt023

[Perdue]

Seeing as how I always regretted not getting the last BD tinted, I'm sitting here watching a guy tint my GT as I type this. Merry Christmas to me. :smt002

[Dead91silvia]

^ It changes the look so much! Your not gonna regret it!

[MRLancaster]

I need tint T.T

[geckoboy86]

I need tint T.T

Me too.

Got my WRX exhaust on my BD. Not perfect yet.

[d1giPhux]

Ugh.. tint. Good luck seeing at night! It makes it look a lot better.. thats for sure, but it sure as hell doesn't make it any easier to see at night. At least around here. We don't have street lights and its dark as death.

[eekay]

Ugh.. tint. Good luck seeing at night! It makes it look a lot better.. thats for sure, but it sure as hell doesn't make it any easier to see at night. At least around here. We don't have street lights and its dark as death.
Fogs and side markers remedy this pretty well. :) I have 5% tint on my car and I can see just dandy.

[Perdue]

I just did 35%. It's not overly dark but looks better. Took a pic walking back to the car after Christmas shopping...now I desperatly need springs.
https://sl-i.net/FORUM/images/imported/2011/12/IMAG0189-2.jpg

[httrdd]

^^^That is about what I am going with. Looks good.

[Okin DaVanh]

^^^That is about what I am going with. Looks good.
Same here. I was thinking of ordering a quality pre-cut set. I was a bit on the fence, but now I'm a bit more convinced to go through with it.

[Perdue]

You gotta shrink the tint a little for the rear quarter glass or whatever, and a lot for the read window. Of all the things I know how to do and would consider trying when it comes to cars, tint has always intimidated me.

[d1giPhux]

Looks great man! 35% is def the way to go.

eekay: your smokin crack. 5%.. wtf. You don't even NEED that. Thats redic.. it doesn't even GET that sunny there! :lol: But, to each their own!

[geckoboy86]

<2 miles away from 190,000 miles

[tylerkroh]

i got my gt back on the road today after having no time to get parts :grin: BUT now i need a battery :smt012

[98legwag]

Drove mine to work. Put new bulbs in the headlights of the family beater Outback. Went with Hella Xenon +30% H1 low beams and Narva Xenon +30% 9005 high beams. Made a BIG difference. I can see at night now while driving that car.

[07_2.5i]

cut out the resonator and replaced it with straight pipe on my 07 2.5i...... now i just have to get rid of the stupid clamps that i used and weld it together to get rid of the annoying leak!!! and then next step is to get new mufflers....

[eekay]

Looks great man! 35% is def the way to go.

eekay: your smokin crack. 5%.. wtf. You don't even NEED that. Thats redic.. it doesn't even GET that sunny there! :lol: But, to each their own!
Haha. Are you crazy? It's so damn sunny here it's ridiculous! Plus, sun is really, REALLY bad for your interior. My interior is pristine and I would like it to stay that way. Plus, with leather, the sun makes the seats retarded hot unless the windows are retarded dark. Plus, the tint is so black that there's not even a chance of seeing through it. I like to be mysterious. :)

[superu]

Looks great man! 35% is def the way to go.

eekay: your smokin crack. 5%.. wtf. You don't even NEED that. Thats redic.. it doesn't even GET that sunny there! :lol: But, to each their own!
Haha. Are you crazy? It's so damn sunny here it's ridiculous! Plus, sun is really, REALLY bad for your interior. My interior is pristine and I would like it to stay that way. Plus, with leather, the sun makes the seats retarded hot unless the windows are retarded dark. Plus, the tint is so black that there's not even a chance of seeing through it. I like to be mysterious. :)

:smt017 5% can't be legal? :smt017 Although, it's waaay easier to blend in and hide in the big city.

I had to scrape my 20% in front last year for UTard inspection... All the shops (in Moab) that looked the other way in the past have closed their doors :smt012

On a side-note, I had limo all around on my high school dodge dart (back in the day) :smt018
Now THAT was stupid dark!!! I seriously couldn't see squat in that car at night!!! I actually had to roll down the front windows to drive at night. :smt005


But I digress, the 35 all around looks sweet on that silver sedan!

[eekay]

5% is limo. Lol.

[Perdue]

Washed her up and took some proper photos...more on this letter.

[Danny-G]

Put 100w bulbs in my Hellas, 55w came out. Once its dark I'll be able to tell if theres a difference.

[Okin DaVanh]

Put 100w bulbs in my Hellas, 55w came out. Once its dark I'll be able to tell if theres a difference.
I hope they're glass. If not, read what 98LegWag had to say here:
viewtopic.php?f=10&t=4811 (https://sl-i.net/FORUM/viewtopic.php?f=10&t=4811)

[tylerkroh]

bought a new battery today so my car is officially back on the road :grin:

[Perdue]

From today's previously mentioned photoshoot :smt006

https://sl-i.net/FORUM/images/imported/2011/10/IMG_0817-1.jpg

https://sl-i.net/FORUM/images/imported/2011/12/IMG_0819-1.jpg

https://sl-i.net/FORUM/images/imported/2011/12/IMG_0822-2.jpg

[racingking951]

^^Your car is looking nice

on another note my fuel pump went out the other night and the day after i replaced it my car started overheating from a leaking coolant hose under the throttle body.

[superu]

rotated tires and discovered a loose axle nut :shock: YIKES!!!
AFTER the following runs (Maybe on one of these front end jobs I'll get new axle nuts :roll: )

Up:
http://youtu.be/M628HPhAWHI

and down a steeper line on the back, plus the icy pond exit:
http://youtu.be/rPOViz2vq3s

a climb on Hell's Revenge:
https://sl-i.net/FORUM/images/imported/2011/12/P1050464JPG-1.jpg


:smt026 :smt026 :smt027 :smt026 :smt026

[racingking951]

I finally got a pair of jdm projector headlights...

Too bad they sent me 2 drivers side ones

[eekay]

Haha. What? Where did you get them from?

[racingking951]

some guy on ebay his seller name was "new_stars"
he had a 99.7% positive rating with 2463 ebay score

its ok though cause i already contacted him and he said he will "take care of it ASAP"

on another note I painted my car flat white haha

https://sl-i.net/FORUM/images/imported/2011/12/20111219_221054_855-1.jpg